|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
May 18th, 2008, 01:07 PM
|
#1 |
|
Major Player
Join Date: Feb 2005
Location: Rio de Janeiro - Brasil
Posts: 304
|
Problem when turning on HD 100a
Hi
My HD 100a has been used very few times. But once a month I fully discharge my 3 bateries (438) and charge them. No problem until last week. When I tried turning on the camera, it started to flash tally light as well as rec and HDV / DV lights and didn`t turning on. This happen with battery and DC. The JVC camera manual says that to "solve" this problem I should turn off the camera and wait. I did it and the problem remained. In my nineth attempt the camera turned on normally. Well, since then the problem has always ocurred and the number of attempts to recover the camera (turning it off and on latter) normal behavior has varied ramdomly. Have anyone had this problem and knows its source and how to solve it? Thank you for your attention. Ron |
|
|
|
May 19th, 2008, 07:41 PM
|
#2 |
|
Major Player
Join Date: Feb 2005
Location: Rio de Janeiro - Brasil
Posts: 304
|
Hello! No one can help???
Ron |
|
|
|
|
May 19th, 2008, 10:02 PM
|
#3 |
|
Major Player
Join Date: Jan 2005
Location: Modesto, California
Posts: 206
|
these posts sounds similar to your issue
http://dvinfo.net/conf/showthread.ph...light=blinking http://dvinfo.net/conf/showthread.ph...light=blinking I'd recommend contacting JVC service. |
|
|
|
|
May 20th, 2008, 12:58 PM
|
#4 |
|
Major Player
Join Date: Feb 2005
Location: Rio de Janeiro - Brasil
Posts: 304
|
Thank you for your attention Carlos.
Ron |
|
|
|
|
| ||||||
|
||||||
|
|
