|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
March 31st, 2007, 06:49 AM
|
#1 |
|
Trustee
Join Date: Jun 2004
Location: Chiyoda-ku, Tokyo
Posts: 1,382
|
HD250 remote to Decklink HD Extreme 9 pin
Does anyone know that a cable which can be used for Decklink HD Extreme 9pin to control GY-HD250 via remote jack?
Thanks in advance. |
|
|
|
March 31st, 2007, 11:54 AM
|
#2 |
|
Trustee
Join Date: Apr 2006
Location: United States
Posts: 1,158
|
FW isn't rs422 so a you can't get there from here with a simple cable. horita *might* have a FW to 422 converter box, but expect its a couple hundred bucks. there may be other converters out there too, but its two totally different transport languages and interfaces. generally speaking such a box is a FW port and a 422 port with a simple CPU in the middle to handle translation and timing
|
|
|
|
|
March 31st, 2007, 05:45 PM
|
#3 |
|
Trustee
Join Date: Jun 2004
Location: Chiyoda-ku, Tokyo
Posts: 1,382
|
Steve,
I was wondering if the "remote" on HD250 works with 9 pin control or not. I was trying to use the HDSDI to capture and use firewire to do the device control with Decklink HD Extreme but FCP don't let me, so I was wondering if the "remote" on the HD250 converts to 9 pin control with a cable. I'm aware of Firewire to 9 pin conversion, thanks anyways. |
|
|
|
|
April 1st, 2007, 08:30 PM
|
#4 | |
|
JVC America
Join Date: Mar 2005
Location: McKinney, TX
Posts: 516
|
Quote:
The 6 pin "remote" ports on the HD200 and HD250 are for CCU control (camera "paint" functions, like iris, detail, set-up, gain, ect.) This remote port has nothing to do with tape transport control. Tape control is only via firewire. Regards,
__________________
Carl Hicks JVC Professional Products Company |
|
|
|
|
|
April 1st, 2007, 08:40 PM
|
#5 |
|
Trustee
Join Date: Jun 2004
Location: Chiyoda-ku, Tokyo
Posts: 1,382
|
Carl,
Thanks for the clarification. I guess I have to get the deck. |
|
|
|
|
| ||||||
|
||||||
|
|
