DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   JVC GY-HD Series Camera Systems (https://www.dvinfo.net/forum/jvc-gy-hd-series-camera-systems/)
-   -   Read-outs on external monitor (https://www.dvinfo.net/forum/jvc-gy-hd-series-camera-systems/98839-read-outs-external-monitor.html)

Tim Kahn July 12th, 2007 08:43 PM

Read-outs on external monitor
 
Hi,
Please forgive my ignorance, I have failed to find an obvious answer to my question by searching...
I am using a HD-100 with a Steadicam Flyer and I would like to know if it is possible to view things like frame lines, center cross, shutter speed, etc. in the Flyer monitor. The camera and the monitor are connected via composite. I have failed to find a menu option for this, but curiously the menu is output to the Flyer monitor. So can I do this?
Thanks!

Tim Dashwood July 12th, 2007 11:34 PM

Unfortunately the original HD100 cameras cannot output superimposed information other than the menus.
This was one of the main items on our wishlist and JVC added the ability to toggle VF data to the video outputs on the HD110, HD200 and HD250.

Tim Kahn July 12th, 2007 11:54 PM

Ah, too bad.
Thanks for the confirmation!

Matthew Rogers July 13th, 2007 07:18 AM

Quote:

Originally Posted by Tim Dashwood (Post 711361)
Unfortunately the original HD100 cameras cannot output superimposed information other than the menus.
This was one of the main items on our wishlist and JVC added the ability to toggle VF data to the video outputs on the HD110, HD200 and HD250.

How do you friggin get that info going out on a 110? I did a shoot the other day which that would have been useful for, but all they could see was the menu when I switched the setting I believe is the output setting. I've also set the battery to display "time" left instead of voltage, but it still displays voltage..sigh

Matthew

Joseph A. Benoit July 13th, 2007 08:58 AM

Hello
the battery display
will only show time if you are using Anton Bauer battery system

joe

Tim Dashwood July 13th, 2007 10:55 AM

Quote:

Originally Posted by Matthew Rogers (Post 711464)
How do you friggin get that info going out on a 110? I did a shoot the other day which that would have been useful for, but all they could see was the menu when I switched the setting I believe is the output setting. I've also set the battery to display "time" left instead of voltage, but it still displays voltage..sigh

Matthew

Were you using component HD, or composite SD?

It should work with the output setting turned on, at least on the composite SD output. I could be wrong though. I don't have a HD110 sitting in front of me to test this.
Quote:

Originally Posted by Joseph A. Benoit (Post 711502)
Hello
the battery display
will only show time if you are using Anton Bauer battery system

joe

Specifically, an Anton Bauer battery that can 'talk' with the camera. (Dionic 90 for example.) A third party battery (even AB gold mount) like Swit will only give you a voltage reading.

Matthew Rogers July 13th, 2007 09:55 PM

Quote:

Originally Posted by Tim Dashwood (Post 711570)
Were you using component HD, or composite SD?

It should work with the output setting turned on, at least on the composite SD output. I could be wrong though. I don't have a HD110 sitting in front of me to test this.

Specifically, an Anton Bauer battery that can 'talk' with the camera. (Dionic 90 for example.) A third party battery (even AB gold mount) like Swit will only give you a voltage reading.

Weird, I was using composite SD to a JVC monitor. I will have to look more through the manual to see if there is another setting that does it.

It seems like I did know that only the AB batteries could talk with the camera, but forgot it. I wonder why the camera can't figure out how much time is left off the voltage..it really should be able to calculate the power draw and then figure it out from there..sigh...

Matthew

John Mitchell July 17th, 2007 08:07 AM

Quote:

Originally Posted by Matthew Rogers (Post 711851)
Weird, I was using composite SD to a JVC monitor. I will have to look more through the manual to see if there is another setting that does it.

It seems like I did know that only the AB batteries could talk with the camera, but forgot it. I wonder why the camera can't figure out how much time is left off the voltage..it really should be able to calculate the power draw and then figure it out from there..sigh...

Matthew

The AB batteries that work have digital hardware built in to them that monitors voltage drop and current draw against pre-determined limits. Sony has a similar system in their info lithium range. Problem with incorporating this stuff in a camera is that the camera has no way of knowing how big the battery is, when that particular brand/type stops supplying enough energy and what other peripherals you have drawing current from your battery.


All times are GMT -6. The time now is 06:52 PM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2025 The Digital Video Information Network