|
|||||||||
|
Thread Tools | Search this Thread |
November 3rd, 2012, 11:46 AM | #1 |
Regular Crew
Join Date: Jul 2008
Location: Germany
Posts: 48
|
HM700 Viewfinder to use on other Cameras?
I have a few viewfinders for the hm700 lying around, so I wondered if its possible to cut of the 20-pin connector and get it to have a BNC connector for SDI, one for Power etc. Might that be possible? Im planning to use it as a VF for my F3. Anyone have a clue?
|
November 3rd, 2012, 11:54 AM | #2 |
Regular Crew
Join Date: Apr 2009
Location: Hilversum, The Netherlands
Posts: 184
|
Re: HM700 Viewfinder to use on other Cameras?
If you can find a HM700 service manual and figure out the pinout you could probably get it going.. However it is likely that the viewfinder is RGB..
I have adapted B/W viewfinders for DSLR's in the past which is perfectly doable, but only if you have the pinout of the viewfinder.. Also, instead of cutting off the connector it's much better to find a counter-connector (such as the one the HM700 body has, but then seperate), then your viewfinder still keeps it's value.. |
July 15th, 2017, 08:38 PM | #3 | |
New Boot
Join Date: May 2009
Location: Emyvale, Ireland
Posts: 11
|
Re: HM700 Viewfinder to use on other Cameras?
Quote:
Gregmurphy69@hotmail.com |
|
June 14th, 2018, 07:22 PM | #4 |
Regular Crew
Join Date: Aug 2003
Location: Gansevoort, NY
Posts: 138
|
Re: HM700 Viewfinder to use on other Cameras?
hi
just a shot in the dark, but do you have the 700 camera body? I could use one my email: tvcam20@hotmail.com thanks ed k |
| ||||||
|
Thread Tools | Search this Thread |
|