|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
April 16th, 2002, 06:40 PM
|
#1 |
|
Posts: n/a
|
DV Capture in Windows 2000
I was sucessfully using Windows 98SE with my firewire capture card and Sony TRV230E camera. I had to load the DirectX8.0 patch for DV to get it to work but after that all was ok.
I have moved to Windows 2000, and just can't get it working. Capture is using ULead VideoStudio 4, and I get the captrue working for about 30 seconds but then a few frames with artifacts come up and then the link to the camera is lost with a "DV device missing or tape has been removed" message. Have tried with both Direct X8.0 (patched) and 8.1. Does anyone have any ideas? Kind regards Andrew |
|
|
April 16th, 2002, 10:34 PM
|
#2 |
|
Trustee
Join Date: Oct 2001
Location: Chigasaki, Japan.
Posts: 1,660
|
First of all, go the Windows Update via the link on your start menu and dl all the service packs and updates. This might fix your problem.
__________________
Adrian DVInfo.net Search for quick answers Where to buy? From the best in the business...DVInfo.net sponsors |
|
|
|
April 17th, 2002, 02:37 AM
|
#3 |
|
RED Code Chef
Join Date: Oct 2001
Location: Holland
Posts: 12,514
|
What kind of firewire card do you have? It sounds like either
this one is causing a problem (wrong or buggy drivers?) or the ulead package is under windows 2000. Make sure both your card and the ulead package are okay with windows 2000. Not everything is (still).
__________________
Rob Lohman, visuar@iname.com DV Info Wrangler & RED Code Chef Join the DV Challenge | Lady X Search DVinfo.net for quick answers | Buy from the best: DVinfo.net sponsors |
|
|
|
|
| ||||||
|
||||||
| Thread Tools | Search this Thread |
|
|
