Any Engineers Out There? at DVinfo.net

Dan Grimes · July 10th, 2003, 04:22 PM

I am an engineer at a small university television station and we use quite a lot of DVCAM equipment (BetaSP, too, but obviously this isn't the place for that). Likewise, I use mini-DV/DVCAM for video production at church and independently. The equipment has been quite sturdy for many years of abuse, but I am now starting to get failures.

Are there any fellow engineers that work on DVCAM equipment that might want to talk shop with problems?

Are there other forums that I should be using for this kind of discussion? Or is there an interest to talk technical?

Robert Knecht Schmidt · July 10th, 2003, 05:05 PM

Your mileage may vary depending on your specific problem, but you've surely come to the right place!

July 10th, 2003, 04:22 PM	#1
Dan Grimes New Boot Join Date: Aug 2002 Location: Las Vegas, NV USA Posts: 18	Any Engineers Out There? I am an engineer at a small university television station and we use quite a lot of DVCAM equipment (BetaSP, too, but obviously this isn't the place for that). Likewise, I use mini-DV/DVCAM for video production at church and independently. The equipment has been quite sturdy for many years of abuse, but I am now starting to get failures. Are there any fellow engineers that work on DVCAM equipment that might want to talk shop with problems? Are there other forums that I should be using for this kind of discussion? Or is there an interest to talk technical?

July 10th, 2003, 05:05 PM	#2
Robert Knecht Schmidt Wrangler Join Date: Feb 2002 Location: Cleveland, Ohio Posts: 1,933	Your mileage may vary depending on your specific problem, but you've surely come to the right place! __________________ All the best, Robert K S Search DVinfo.net for quick answers \| The best in the business: DVinfo.net sponsors

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search