|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
July 10th, 2003, 11:27 PM
|
#1 |
|
New Boot
Join Date: Jul 2003
Location: London
Posts: 20
|
What You See
Hi, being new to this...just a quick question I could do with help on. Using a VX2000, what I see on the viewfinder bears no relationship to what I get from the tape. Is a lead from the composite out while videoing to a monitor/TV going to show exactly what is being recorded to the tape, or will it always be a guessing game.. and if not, will a small TV/Monitor be OK. thanks in advance for any help.
|
|
|
|
July 10th, 2003, 11:42 PM
|
#2 |
|
Obstreperous Rex
|
In what terms? Are you referring to color, scan area, both, neither? Please elaborate with specific details. Thanks,
|
|
|
|
|
July 11th, 2003, 01:38 AM
|
#3 |
|
New Boot
Join Date: Jul 2003
Location: London
Posts: 20
|
I should point out that I bought the camera 2nd hand. picture darker. color differant. I was thinking of setting back the camera to its factory defaults. what do you think.
|
|
|
|
|
July 11th, 2003, 10:24 AM
|
#4 |
|
Wrangler
Join Date: May 2002
Location: Vallejo, California
Posts: 4,049
|
Not certain why this thread is in this location but here goes.
Reset the camera and then change the operation until what you get on tape resembles what you expect when you sit down to the editing system or to view the results on your TV. Understand that the LCD displays of the VX-2000 are not ever going to look the same as an analog TV using a CRT.
__________________
Mike Rehmus Hey, I can see the carrot at the end of the tunnel! |
|
|
|
|
July 11th, 2003, 01:00 PM
|
#5 |
|
New Boot
Join Date: Jul 2003
Location: London
Posts: 20
|
thanks for the reply.. I did reset and now it looks a heep lot better.
|
|
|
|
|
| ||||||
|
||||||
| Thread Tools | Search this Thread |
|
|
