DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   Open DV Discussion (https://www.dvinfo.net/forum/open-dv-discussion/)
-   -   Sony ECM-672 microphone question... (https://www.dvinfo.net/forum/open-dv-discussion/88286-sony-ecm-672-microphone-question.html)

Stembridge March 6th, 2007 11:21 AM

Sony ECM-672 microphone question...
 
My ecm-672 is a little loose on the end, where the XLR cable plugs in. Anyone have an idea of how to tighten it back up? The battery cover slides down over the connection; but doesn't seem to off.
Thanks!

Stembridge March 6th, 2007 12:05 PM

Quote:

Originally Posted by Stembridge (Post 636954)
My ecm-672 is a little loose on the end, where the XLR cable plugs in. Anyone have an idea of how to tighten it back up? The battery cover slides down over the connection; but doesn't seem to off.
Thanks!

YIKES! well, I found that removing the upper housing enables the lower housing to slide forward. Found not only was the internal screw loose; but 2 tiny wires have become unattached from the little board... The screw the seems to hold this in place is on the plastic battery housing, and appears to be stripped out.

Any ideas on the best way to repair these?
Thanks again!


All times are GMT -6. The time now is 09:38 AM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2021 The Digital Video Information Network