MX300 PAL firmware 1.6 solves DV OUT Glitches & IMPROVES OIS by 2X!

Frank Granovski · December 17th, 2002, 12:13 AM

It's there, I just checked it. Just click on that link, then it will either open up in your PDF reader, or you can save it (download it to your computer). It's a small file.

Frank Granovski · December 17th, 2002, 03:15 AM

Fixed. (Sorry.) I was too hasty.

Steven Khong · February 19th, 2003, 08:17 PM

I think to make it easier for people to see this, better bump it up.

Steven Khong · February 25th, 2003, 10:10 PM

I realized that somehow, Macintosh owners don't complain about this DV OUT glitch problem. I know this guy Bo in Netherlands who's not upgraded his MX300, and uses a Mac, but has never seen the glitches problem.

Most likely it's to do with the DV drivers (my bet is on the Texas Instrument drivers) on the PC that are buggy?

Frank Granovski · February 26th, 2003, 12:11 AM

You got me. I don't know who makes these drivers and which work and which do not. I'm like most people: if it works, great; if it doesn't, I bitch! (My wife bitches more than me, thank G_d!)

Alan Suen · February 26th, 2003, 07:07 PM

I bought my MX 300EN in Hong Kong is well. Shun Hing is useless. They refuse to do any firmware upgrade on my camera. And they keep blaming the problem on my computer. So I was really pi*s off with them.

I contacted Panasonic Australia. They acknowledged the problem straight away, and refer me to one of their service centre. They did the firmware upgrade for me while I wait.

Let me know if you more info

You can email me on mgmoo2@hotmail.com

Alan

February 26th, 2003, 07:07 PM	#36
Alan Suen New Boot Join Date: Jan 2003 Location: Australia Posts: 13	I bought my MX 300EN in Hong Kong is well. Shun Hing is useless. They refuse to do any firmware upgrade on my camera. And they keep blaming the problem on my computer. So I was really pi*s off with them. I contacted Panasonic Australia. They acknowledged the problem straight away, and refer me to one of their service centre. They did the firmware upgrade for me while I wait. Let me know if you more info You can email me on mgmoo2@hotmail.com Alan __________________ Al

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

December 17th, 2002, 12:13 AM	#31
Frank Granovski Outer Circle Join Date: May 2002 Location: Hope, BC Posts: 7,524	It's there, I just checked it. Just click on that link, then it will either open up in your PDF reader, or you can save it (download it to your computer). It's a small file.

December 17th, 2002, 03:15 AM	#32
Frank Granovski Outer Circle Join Date: May 2002 Location: Hope, BC Posts: 7,524	Fixed. (Sorry.) I was too hasty.

February 19th, 2003, 08:17 PM	#33
Steven Khong Regular Crew Join Date: Dec 2002 Location: Petaling Jaya, Selangor, Malaysia Posts: 112	I think to make it easier for people to see this, better bump it up.

February 25th, 2003, 10:10 PM	#34
Steven Khong Regular Crew Join Date: Dec 2002 Location: Petaling Jaya, Selangor, Malaysia Posts: 112	I realized that somehow, Macintosh owners don't complain about this DV OUT glitch problem. I know this guy Bo in Netherlands who's not upgraded his MX300, and uses a Mac, but has never seen the glitches problem. Most likely it's to do with the DV drivers (my bet is on the Texas Instrument drivers) on the PC that are buggy?

February 26th, 2003, 12:11 AM	#35
Frank Granovski Outer Circle Join Date: May 2002 Location: Hope, BC Posts: 7,524	You got me. I don't know who makes these drivers and which work and which do not. I'm like most people: if it works, great; if it doesn't, I bitch! (My wife bitches more than me, thank G_d!)