|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
October 1st, 2006, 09:26 PM
|
#1 |
|
Major Player
Join Date: May 2005
Location: Columbia,SC
Posts: 806
|
GS-120 stuck with tape inside!!
Hello All,
I'm hoping this is the right forum for this. I have a serious issue with my GS-120, and I'm hoping someone can help. When I was getting ready for the wedding on Saturday, I pulled out the old GS120 to load a tape. It got halfway through ejecting the tape that was in it, and displayed the message "press the reset button" I do that and it goes off for as long as that button is held down. When I release the button, it comes back on displaying that message again. No mode change or any change will affect the state of the camera, and worst of all, there is a tape of my son stuck in there. I really only use it for a 4th camera and as the deck for my sonys but I really don't want to have to spend another $500 to get another one. Any suggestions? or is the little guy doomed... Bill www.grantphotovideo.com |
|
|
|
October 1st, 2006, 10:22 PM
|
#2 |
|
Inner Circle
Join Date: Nov 2005
Location: Elk Grove CA
Posts: 6,838
|
I have GS 120. Are you able to get the door open ??? Is it just that it won't eject ?
There is a little panel on the right side under door, that accesses some screws that seem to be associated with the tape ejections system. Open that up and see if an adjustment might help. I have no idea what to tell you otherwise...
__________________
Chris J. Barcellos |
|
|
|
|
| ||||||
|
||||||
|
|
