DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   Panasonic LUMIX S / G / GF / GH / GX Series (https://www.dvinfo.net/forum/panasonic-lumix-s-g-gf-gh-gx-series/)
-   -   Gh5 firmware 2,0 (https://www.dvinfo.net/forum/panasonic-lumix-s-g-gf-gh-gx-series/534721-gh5-firmware-2-0-a.html)

Gary Huff October 6th, 2017 09:33 AM

Re: Gh5 firmware 2,0
 
Here's a clip for you, the first is UHD 8-bit 4:2:0 Slog2/Sgamut from back when I owned the A7R Mark II.

https://drive.google.com/open?id=0Bx...0FGLThFMkY0NTg

The second clip, downscaled with the highest quality scaler out of DaVinci Resolve Studio 14 into 1080 ProRes 12-bit 444.

https://drive.google.com/open?id=0Bx...jcxcVVCWFFpRTg

Now what difference can you illustrate between these two? Or is this workflow not correct? If it's not correct, what should I have done differently?

Cliff Totten October 6th, 2017 09:33 AM

Re: Gh5 firmware 2,0
 
So I'm guessing you are not impressed by the detail...even on your 4k monitor?

I would recommend that you delete that Safari/Chrome 4k player mistake. You don't want people around here to think you don't know what you are doing and that's bad for your rep

Just lookin' out for you, Gary ;-)

Gary Huff October 6th, 2017 09:38 AM

Re: Gh5 firmware 2,0
 
Quote:

Originally Posted by Cliff Totten (Post 1937166)
I would recommend that you delete that Safari/Chrome 4k player mistake. You don't want people around here to think you don't know what you are doing and that's bad for your rep

That doesn't worry me in the slightest. Everyone makes mistakes. I own up to them.

Shaun Forsdyke October 17th, 2017 11:49 AM

Re: Gh5 firmware 2,0
 
Just got a Delkin v60 64gb card.

Shooting 400mb Intra frame, 10Bit, 24p.

First 2 test clips I recorded for 1m30 each. All fine.

Then subsequent 3 clips all stopped recording around 25 seconds.

I noticed that those last 3 clips were recorded when the battery had dropped down to 1 bar.
Also that playback on the camera (at 1 bar battery) resulted in a drop of sound every second. Playback on PC has no issues with sound.

Will do further tests when I've got a full battery.

Edit - Tests on a full battery ran perfectly. 8 minute clip without problems.

Gary Huff October 18th, 2017 07:24 PM

Re: Gh5 firmware 2,0
 
Are you using Panasonic OEM batteries for these tests? I'm interested in the results because I'm looking at Delkin 256GB V60 cards to use for Intra, but it seems odd that a low battery would cause issues (though not impossible).

Shaun Forsdyke October 19th, 2017 03:19 PM

Re: Gh5 firmware 2,0
 
Was using the official battery that came with the camera.

Shaun Forsdyke October 23rd, 2017 04:07 PM

Re: Gh5 firmware 2,0
 
A review on Amazon says slot 1 is uhs 2 and slot 2 is V90.

Any truth in that?

Edit: playback in slot 2 eliminates jumping so certainly appears to be reading faster.

Ron Evans October 23rd, 2017 06:40 PM

Re: Gh5 firmware 2,0
 
Quote:

Originally Posted by Shaun Forsdyke (Post 1937822)
A review on Amazon says slot 1 is uhs 2 and slot 2 is V90.

Any truth in that?

Edit: playback in slot 2 eliminates jumping so certainly appears to be reading faster.

I believe they are both the same. The important thing is the card speed both are UHS 2. V60 is on the limit I think as that means a minimum of 60MBps second write speed or 480 Mbs. I think you may find that a V90 card will be more consistent as any variation does not give you a lot of margin.V90 would be 720Mbps write minimum. Which I think Panasonic states as the preferred card.


All times are GMT -6. The time now is 12:26 AM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network