"Lamp" Query!! at DVinfo.net

James Curran · June 24th, 2008, 10:57 AM

Hi all. I quick question re lamps.

I recently purchased a JTL Everlight kit from a friend who was over from America. The lamp has blown and I'm now trying to find the best place to purchase additional ones. Can anyone recommend anywhere in the UK that stocks lamps for this kit?

I also have an
- Arri 650 Watt Plus Tungsten Fresnel light
- Lowel Omni-Light (I forget the wattage)
- LTM Pepper 420 Watt Fresnel Tungsten Light

Could anyone advise as to the best place to source lamps for these too?

Many thanks.

Brian Drysdale · June 24th, 2008, 02:41 PM

Pro kit should manage most of those:

http://www.prokit.co.uk/products.htm...23&man=&page=1

The JTL Everlight might prove more difficult unless you know the details of the lamp type.

James Curran · June 25th, 2008, 08:47 AM

Thanks very much!

Paul R Johnson · June 25th, 2008, 09:13 AM

The base looks like a G9.5 (not a GY9.5 - as GYs have different pin sizes, one small, one larger). Not sure which filament version they are, but are you sure they do a 230V version? I doubt they are low voltage types , so have you got some kind of transformer? If you can let us have the code off the lamp (it will be EH* - the last letter describing the power and colour temp.)

June 24th, 2008, 10:57 AM	#1
James Curran Regular Crew Join Date: Jun 2008 Location: Dromara, Northern Ireland Posts: 34	"Lamp" Query!! Hi all. I quick question re lamps. I recently purchased a JTL Everlight kit from a friend who was over from America. The lamp has blown and I'm now trying to find the best place to purchase additional ones. Can anyone recommend anywhere in the UK that stocks lamps for this kit? I also have an - Arri 650 Watt Plus Tungsten Fresnel light - Lowel Omni-Light (I forget the wattage) - LTM Pepper 420 Watt Fresnel Tungsten Light Could anyone advise as to the best place to source lamps for these too? Many thanks.

June 24th, 2008, 02:41 PM	#2
Brian Drysdale Inner Circle Join Date: Feb 2006 Location: Belfast, UK Posts: 6,143	Pro kit should manage most of those: http://www.prokit.co.uk/products.htm...23&man=&page=1 The JTL Everlight might prove more difficult unless you know the details of the lamp type.

June 25th, 2008, 08:47 AM	#3
James Curran Regular Crew Join Date: Jun 2008 Location: Dromara, Northern Ireland Posts: 34	Thanks very much!

June 25th, 2008, 09:13 AM	#4
Paul R Johnson Inner Circle Join Date: Nov 2005 Location: Lowestoft - UK Posts: 4,016	The base looks like a G9.5 (not a GY9.5 - as GYs have different pin sizes, one small, one larger). Not sure which filament version they are, but are you sure they do a 230V version? I doubt they are low voltage types , so have you got some kind of transformer? If you can let us have the code off the lamp (it will be EH* - the last letter describing the power and colour temp.)