|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
January 3rd, 2005, 10:42 AM
|
#1 |
|
New Boot
Join Date: May 2004
Location: Houston, Texas
Posts: 20
|
Neon Transformer
For a short film, I need to dim a neon sign to simulate a short circuit.
Will I damage the transformer by using a standard household light dimmer on the AC to the transformer? The dimming would only be for short blinks. Thank you, Douglas |
|
|
|
January 3rd, 2005, 01:37 PM
|
#2 |
|
Air China Pilot
Join Date: May 2002
Location: Vancouver, B.C.
Posts: 2,389
|
And I came to this thread expecting robots.
__________________
-- Visit http://www.KeithLoh.com | stuff about living in Vancouver | My Flickr photo gallery |
|
|
|
|
January 3rd, 2005, 08:57 PM
|
#3 |
|
Wrangler
|
Doug,
If you want to do this, buy the dimmer that is meant for inductive rather than resistive loads. A neon sign as you stated, uses a step up transformer and is therefore a coil which is an inductive load as opposed to a regular lamp filament which is a resistive load. You would be more likely to burn up the dimmer unit if you used the wrong one. Be careful. Let us know how it works out. =gb= |
|
|
|
|
January 3rd, 2005, 10:23 PM
|
#4 |
|
New Boot
Join Date: May 2004
Location: Houston, Texas
Posts: 20
|
NEON TRANSFORMER
Dear Greg:
Thanks so much. Will search out the correct dimmer. Regards, Douglas |
|
|
|
|
| ||||||
|
||||||
| Thread Tools | Search this Thread |
|
|
