If your camera has an Anton Bauer mount, the camera can run from the sled/bottom battery. I am including the cord and the battery plate. It comes with the original soft case and all original accessories (stand, cables, etc).

I would be interested in some things like Sound Devices recorders, Schoeps or Sennheiser matched pair microphones, and I'm certainly interested in other similar things, partial or full trade possible.
Thanks!

I'd love it but I'm not in the market for one till late August. Had a budget for practically the same thing for $2500.

It is an auto-leveling crane and as well as having the ability to tilt with the crane attached to the Hercules Head.

You can't pan it other than swinging the arm. And at the full extension 18' and 12' you have to lock off the hercules head for safety. However, in the 8' and 5.5' configurations you can use your tripod head.

This link should help you - http://www.kesslercrane.com/images/s...%20All%203.mov

It shows how this works. Kessler doesn't recommend this in the 12 or 18 configuration though.

Tim

Hi Tim

Would you accept 1500 plus shipping?

Regards steve

Rails sold and shipped.

video testing today.

no edited raw footage, the camera is simply sitting on the rail block and the rail is placed on the table.

no special sound improvement, just the sound quality directly from the camera.

Maybe you can buy it off this guy:
http://www.dvinfo.net/forum/private-...otgun-mic.html

Maybe you can sell it to this guy;
http://www.dvinfo.net/forum/private-...-ag-hmc40.html

Price Reduction
 

Price reduced to 700 AUD. Is there no one needing a video editing box in Sydney ?

Cineform Neo 4K v5
 

I no longer use/need cineform software and I just got my serial number for the new Cineform Neo 4k v5 that came out a few days ago. I would like to sell/transfer it to someone who needs it.
$490, more than half off full price

agilityvision@gmail.com is my email address

Canon XHA1 EXCELLENT CONDITION
 

Up for sale is a Canon XHA1 in excellent condition. I purchased this from BH in September 2008 and took great care of it. It will ship in the the original box with all original accessories and an extra long life battery. email steve@studiozfilms.com Asking $2000 plus shipping.

still available.

Editing Desk .... Question
 

Hi All...
Just wanted to hear opinions on a decent editing desk, why you like what you have and any suggestions? I cannot afford the $2-3,000 that some of these things cost so looking for good leads on where to find a used one or maybe if someone has made one?

Sort of like the kidney bean shaped desks that have another smaller shelf on top of the bigger one. Has anyone found a good alternative from maybe Office Depot or something like that? Thanks in advance for any advice.

DVInfo.net ROCKS!!! The folks here are truly awesome! Chris... you started a great thing dude :-) More soon.... Peace, R

Attached is a photo of pretty nice desk... just wish it had a smaller shelf layer in the back. Ideas? THANKS!

Lectrosonics Wireless Mic System
 

I picked this up from B&H about a year ago, and have decided to part with it. Why? Well, I figure if I'm going to drop a wireless system in the ocean (which is where I spend most of my time shooting), it might as well be a cheaper wireless system.

So…

(1) Lectrosonics LMa Transmitter
http://www.bhphotovideo.com/c/product/533267-REG/Lectrosonics_LMA_21_LMa_Frequency_Agile_Digital_Hybrid.html
(1) Lectrosonics UCR100 Receiver
http://www.bhphotovideo.com/c/product/261198-REG/Lectrosonics_UCR100_21_100_Series_UHF.html
(2) Lectrosonics Mini to XLR Cables
http://www.bhphotovideo.com/c/product/261215-REG/Lectrosonics_MC100XLR_Mini_to_XLR_Output.html
No mic is included here, just the items mentioned above. All gear is in perfect working order, with some very minor cosmetic blemishes. I'll also include a B.E.C. Group hotshoe-mount receiver holder for free.

First $950 via Paypal (shipping included to CONUS) takes the package.

Bad links...

Thanks!
 

Fixed now, I think.

If you're looking for inexpensive but solid, the Studio RTA Recording Work Stations are a good bang for the buck. I've had a few of these and been quite happy. Hard to beat the prices. They are delivered un-assembled so have power tools and a friend or two ready to help out.

WOW Thank you Michael!!!
 

Hey Michael... I have never seen these before. AWESOME!!! Exactly the type and price I was hoping for. Dude you are stellar :-) We even have a "Guitar Center" here in 'pod dunk' south Louisiana where I live. I cannot thank you enough! Will be going there tomorrow to get something.

Have a great weekend! God Bless, Roze

sold pending payment

Final Cut Studio 2 & Sony Vegas Pro 8.0
 

I have two extra licenses/serial numbers for this software. Paypal only. Buyer pays any shipping fees if applicable. Serial numbers are valid for upgrades to newer versions.

US$450 - Final Cut Studio 2.0
US$150 - Sony Vegas Pro 8.0

Price drop:

$2100obo!

Roze,
Where in the swamp are ya? Just FYI, A while back (a long while!) I was looking for a similar desk. I treid designing and building one out of MDF and it worked well enough... it was inexpensive and SOLID but I'm not a carpenter and you could tell it was home made. I then went to a few antique/consignment stores and found an old library table (cypress/oak?) that works just fine for me. As a suggestion, just look around for a table that fits your needs and budget and repurpose it! If you are using flat screens, look at adding a couple of VESA ready monitor stands that can attach to the back of the table. This is something I am looking at for myself. It will add a bunch of desktop space by lifting the monitors off the desk. I am also looking at mounting a 32" flat screen on the wall behind the desk for viewing my videos and allowing clients o see what I'm doing without rearranging the room.

DIY is a real option here! Make sure the desk height is right for your keyboard, mouse, and other control surfaces.My library table isn't but the desk chair rises up high enough to make editing comfortable.

Any offers or interested buyers?

Price drop $850. I cover shipping (insurance on the buyer) and you cover paypal fee or personal tab.

thanks

I've had a nice maple workstation-style desk for a while. Ikea has these stainless steel 6" legs, that with some maple shelf stock, made a perfect monitor bridge. Now I have two, holding up 3 monitors, 2 speakers, and a printer.

IKEA | Built-in kitchens | AKURUM/RATIONELL system | CAPITA | Leg

The microphone part of the package has been SOLD.
The DVX100a camera package is still available.

Offer
 

Would you consider $160 including shipping...

Would you be willing to split the difference and meet at $170? I'll set up the payment page if you're interested.

Done - PayPal sent :)

The mic has been sold!

Funny you mentioned IKEA - I've used PAX wardrobe (or actually the long, side pieces) and two computer stands to build dual workstation bench. :-)

Price change to $280!!!

Sony pdx10
 

Anyone have one in their closets that they are willing to part with pm me with a price

Price drop
 

Lower price. $900 including ground shipping, insurance and I pay pay pal fees.

Price Drop
 

Hello All...

I have placed a price drop....New Price $1000.00 +shipping.

Glidecam 4000 Pro Arm & Vest
 

I have a Glidecam 4000 Pro Vest & Arm that I bought with Glidecam 4000 Pro almost a year ago. I have used the full kit may be twice but then moved to just glidecam 4000 pro.

The Vest & Arm are in excellent condition and been once or twice and now up for sale.

Make me a reasonable offer please

Please Note: It doesn't include the stabilizing system.

Thanks

https://mail.google.com/mail/?ui=2&i...disp=inline&zw
https://mail.google.com/mail/?ui=2&i...disp=inline&zw
https://mail.google.com/mail/?ui=2&i...disp=inline&zw

Rode NTG-2 Shotgun Condenser Microphone Mic NTG2 NEW
 

Must sell in the box, Rode NTG-2 w/ Zip pouch, RM5 stand mount, WSVM stand mount and 3/8-5/8" thread adaptor. Wanting a NTG-3...
$225.00 or serious offer. I will ship it for free!!!

Manfrotto 520BALL Half Ball Leveler - 3/8" screw - 75mm
 

The Manfrotto 520BALL 75mm Half Ball - New in box

is designed to facilitate quick leveling of a 75mm ball head with and 75mm bowl tripod, and has a 3/8"-16 threaded screw. It can also be used with the Gitzo G-1422 75mm Bowl Interface Adapter to provide an economical and low profile levelling base with any of the Gitzo Series 3 "systematic" tripods(which feature an interchangeable top plate that accepts rapid or geared center columns as well as levelling bases).

Manfrotto | 520BALL 75mm Half Ball | 520BALL | B&H Photo Video

$45.00 or Serious offer and will ship for free....

Sold!!
 

Camera is sold. Thanks everyone.

Final price drop to $260!