Re: GH1 + 5 batteries and 20mm F/1.7 lens for sale - $650
 

Price lowered from $650 to $600, and is one heck of a deal. Batteries alone worth $150! If you're a wedding shooter, this is everything you need for an amazing low-light b camera. The lens is suitable for getting ready segments, and will produce stunning footage that will beat most any sub $5000 video camera.

Re: Canon XF100
 

SOLD. Thanks, Tom.

Re: Canon XF100
 

Looking forward to getting it, Fred.

Now, what do I do with these two Sony HVR-V1Us?

Re: Canon XF100
 

If I may suggest, sell them and buy a XA10 or G10 as a second camera!

Blackmagic Intensity Pro
 

No use for it anymore, comes with orignal box, documentation and break-out cable. Will get photos up tonight.

Asking $150.00 shipped in the US, paypal only.

Thanks!

Re: Blackmagic Intensity Pro
 

PMd you instead

SG Pro r3 - 35mm adapter kit (rails and lens included)
 

I'm selling my SG Pro r3 35mm adapter kit. It's basically the previous generation to the SG Blade from Shoot35. It allows you to mount a lens on the front of your camcorder (72mm) to produce cinematic depth-of-field shots. The adapter has a built in frosted spinning disc that eliminates dust and gives you that soft artistic look that everyone seems to be after.

The kit comes with the non-flip adapter, Nikkor lens mount, a 50mm f1.4 Nikkor lens, Canavision rails, and an economy protective case. The kit is in great condition.

As a bonus I'll toss in a second Nikkor lens. It's a 24mm f2.8 that has a pretty bad dent on the outer casing but still works great.

I'm asking $500 for the whole kit including shipping anywhere in North America (50mm lens is worth $400 new, and the SG Pro is probably about $500 itself)

Below is an image of the adapter on my HMC150, the 50mm lens, and a link to some footage shot specifically from the adapter/lens that I'm selling.

.

IndiSystems Square/FocusPro/Gears
 

This gear deserves more use that I am giving it.

If you need to move the camera, load it with accessories, and pull focus, this rig will get it done.

The indiFOCUSpro is a great value for the money.

The SNAP! gears can't be beat for the price.

And where will you find a set of rails and small handheld rig for anything near this quality and price?


Everything is in excellent used condition (see pics). There are no known problems. The Giottos MH652 quick release adapter is not shown, but included.


Let me know what questions you may have.


Looking for $295 out the door [including PayPal and FedEx Ground, to your door in CONUSA].

Re: Sony Minolta AF 50mm 1.7 & AF 28mm 2.8 A mount primes
 

50mm is sold. 28 still available

Re: Sound Devices Mixpre - Portable 2 Channel Microphone Field Mixer
 

It has been sold. Thank you!

Simon

Re: 2x R0DE VideoMic with original box: $100/ea + ship
 

* bump *........

Cyber Week after Thanksgiving sale - Canon A1 cams for sale.
 

Ok so I decided to have a little Cyber week fun and see if I can generate some interest in my cams before sending them off to eBay (which I really don't want to do) so I am reposting my 3 Canon XH A1 cams with even better prices.

I finally decided to go the DSLR route so I am selling off my Canon XHA1 cams and a few other things. Here is what I have available. The A1 cams have been used for mostly weddings. They show normal wear and tear acquired over a few years of use. Cams were occasionally used for data capture but mostly for filming. The descriptions below indicate any other issues with each cam. I have tried to price the fairly to move quick and give a good value.


XH A1 – Cam 1 includes: Price $1300 shipping included. Remote control, composite cable and component cable, manual, neck strap, OEM battery charger and AC adapter, OEM battery (starting to get a little reduced run time), extra generic battery (BP945 equivalent) that still has good run times. I can get through a day of wedding shooting with these 2 batteries.

http://i94.photobucket.com/albums/l9...r/P1000077.jpg

XH A1 – Cam 2 includes: Price $1200 shipping included. Component output (yellow/white/red) is NOT functional. Remote control, composite cable and component cable, manual, neck strap, OEM battery charger and AC adapter, OEM battery (starting to get a little reduced run time), extra generic battery (BP945 equivalent) that still has good run times. I can get through a day of wedding shooting with these 2 batteries.

http://i94.photobucket.com/albums/l9...r/P1000079.jpg

XH A1 – Cam 3 includes: Price $1200 shipping included. Small scratch on the lens on the outer edge from a DIY WA converter a few years ago. It does not affect the video in any way and is not visible in any of the footage I have ever shot with it. Remote control, composite cable and component cable, neck strap, OEM battery charger and AC adapter, 2 generic batteries (BP945 equivalent) that still has good run times. I can get through a day of wedding shooting with these 2 batteries. Note: the mic holder was removed because I used a small case for the cam. I have reinstalled it now that the cam is for sale. No lens cap for this camera but it is clean and free of scratches other than the one small one indicated above that does not affect imagery.

http://i94.photobucket.com/albums/l9...r/P1000081.jpg

Here is a pic of the lense showing the small scratch.

http://i94.photobucket.com/albums/l9.../P1000083a.jpg

I also have a Varizoom StealthLX zoom controller for LANC equipped camcorders. Price $110

http://i94.photobucket.com/albums/l9...r/P1000090.jpg

If someone wants all 3 of the cams I will throw in the Zoom controller for free.

Kessler KC8 with Ultra package
 

This Kessler Crane needs to find a better place to work...too much downtime here.

It is the KC-8, with the Ultra package (vertical brake and tool-less kit) and soft case.

The crane is in excellent used condition and works great. I still find it's smooth heavy movement impressive for the price.

I'm looking for $540 out the door (includes PayPal and insured FedEx Ground shipping to you).

I am also listing a VZ-Stealth lanc controller and a couple portable DVD players for monitors so check those out if you need to monitor and control the camera during shooting.

Re: Canon XF100
 

Thanks, Jeff.

I need to keep one, or buy a deck, just to be able to access the large box of HDV tapes we have generated over the last four years.

We don't go to the tapes often, but I need to keep that ability.

Re: Canon XF100
 

Congratulations on your purchase, I would love to have the XF100, nice camera!