Private Classifieds listings from 2016

[John Threat]

I have a Redrock Micro microRemote Handheld Bundle.
It's still $1600+ (after taxes and/or shipping)

Images Of The RedRcok Micro MicroRemote Handheld Bundle

It's brand new! Not in a box (doesnt really come in a box per se) , but has never been used. It's ready to rock for any DP, AC or CAMERA OP , Rental House or Indie Filmmaker.

I'm located in NY , $1200 Or Best Offer.

[John Threat]

Kessler Crane KWIK RELEASE Plate with Short Plate

Costs $139 new without the Short Plate and $174 with the short plate.

Great for quick release off a mount during film production.

I'm selling them $140 a piece.

Photos Of the Kwik Release Plate

I'm located in New York

[Brian Rhodes]

Apple 30" Cinema Display GREAT CONDITION $485.00


2-port USB 2.0 hub, 2 FireWire 400 ports
• Industry-standard DVI connector
• 2,560 x 1,600 optimal resolution, 16.7 million colors, Brightness 400cd/m2, Contrast ratio 700:1
• Design complements the latest Power Macs and PowerBooks
• 2,560 x 1,600 optimal resolution, 16.7 million colors, Brightness 400cd/m2, Contrast ratio 700:1

[Shaun Roemich]

Hi folks.

Been a while.

Have a nearly new condition Sachtler FSB-6T Tripod head with DA 75 L single stage aluminum legs and mid-level spreader with non-slip feet and a Sachtler shoulder bag with strap available for grabs.

4 levels of tilt counterbalance (including 0) and 10 levels of pan drag.

A real fluid head with 13 lbs capacity.

$2000 replacement cost at B&H, excepting that the heavy duty upgrade DA 75 L legs are discontinued. I prefer these legs personally...

Only the tiniest scratches on the legs - you'd swear this thing was brand new. No abuse, everything works just as it should.

Prefer to sell in Canada or Pacific Northwest given shipping costs but will make exceptions for reputable DVInfo users whose names I recognize OR who have a goodly number of posts behind them.

$1400 USD or $1850 CAD (shipping within Canada via Canada Post included - I'll split actual shipping costs with you if you are in the US or prefer UPS or other shipping methods)

Email me at roaddogmedia (at) gmail (dot) com

[Brian Rhodes]

Rode NTG3 Precision RF-Biased Shotgun Microphone (Silver) $550.00

Product Highlights
-RF Rejection and Low Noise
-Withstands Adverse Conditions
-Broadcast Sound Quality
Frequency Response 40Hz to 20kHz
Dynamic Range (Typical) 117dB
Signal-to-Noise Ratio 81dB SPL (A-weighted)
Maximum Input Sound Level 130dB
Power Requirements 48V Phantom Power
Output Impedance Nominal: 25 ohms
Output Connectors 3-pin XLR
Pad No
Low Frequency Roll-Off No
Dimensions (LxDiameter) 10 x 0.74" (255 x 19mm)
Weight 5.74oz (163g)

[Alan Ortiz]

Have two of these that need a home - BRAND NEW, NEVER USED (prob still have receipt as well)

Will sell for $325 via paypal each shipped to your door or buy them together for $600.

Thanks!

[Alan Ortiz]

In excellent condition, no dead pixels or issues. Comes with original box and accessories when purchased as well as two sony L batteries and charger.

Asking: $425 paypal shipped

Thanks!

[Brian Rhodes]

On Camera 150 LED light - Built in Battery $79.00

On Camera 150 LED light - Built in Battery
Charge with USB phone Charger
So Light, so Powerful!
The size of a cell phone

[James Kuhn]

CHRISTMAS SPECIAL!!!!

PRICE REDUCTION!!!

Contact me at jkuhn12 at cfl dot rr dot com for details.

[Peter Richardson]

Lowering price to $700.

[Jeff Dean]

In my opinion the best camera slider on the market.

1 x Shark S1 Slider kit = $700.00
Flywheel Add auxiliary flywheel
1 x Shark extension rails and belt for 60 inch travel (SER2) = $120.00
------------------------------------------------------
Sub-Total: $820.00
With shipping
Total: $848.97 My Cost (You pay $720 shipped in the continental U.S.)

The above is what you will receive. Never used. This is exactly what you would receive by purchasing directly from the company. I purchased it new for the price above directly from the company Camera Motion Research so it's an official Ifootage Shark slider (not a cheap knock off).
Never had time to use it due to a unexpected family sickness. Still in the original boxes. The kit whether you buy it here or from the company does not come with a camera mount head (that's up to you based on your camera) and it does not come with stands. The company recommends light stands (not included) and they also say you can use a tripod (Not included). For three lengths, it would be best to use 3 supports, and the two extra rail sets should be on either side of the rail support.

$720 shipped in the continental U.S. insured with tracking and signature delivery.
Payment: Prefer money order to be received within 7 days.
I'm a professional filmmaker and experienced shipper (over 1600 +eBay feedback).

[Jeff Anselmo]

Sent you an email.

[Dan Gunn]

I have tooooo much equipment sitting in the closet. I want to trade for a "HoverCam Ultra 8"

[Peter Richardson]

Thanks Jeff. Just sent you a message.

Peter

[Jeff Anselmo]

Sorry that the other email didn't get through. Sent you another one :)