|
|||||||||
|
Thread Tools | Search this Thread |
November 26th, 2007, 02:48 PM | #1 |
Major Player
Join Date: Mar 2004
Location: Pacifica, CA
Posts: 348
|
No Component Out with Firewire In?
I'm trying to monitor picture from component out of my FX1 to a Sony PVM 1344. Works fine when playing back tape, but as soon as I plug in the 1394 cable, the component out signal goes away. I can see the picture from the timeline (PPro) in the FX1's viewfinder just fine but it won't pass through to the component out. I'm editing a standard def dv project, the FX1 is set to DV Conv 'on' and VCR is 'auto'. The Component out is set to '480i'. Any ideas or is this just a quirk of the FX1?
|
November 26th, 2007, 11:07 PM | #2 |
Major Player
Join Date: Dec 2005
Location: Melbourne, Australia
Posts: 595
|
From memory, you can't do this on a Sony Z1P, so I doubt you'll be able to do it on a FX1.
|
November 26th, 2007, 11:49 PM | #3 |
Major Player
Join Date: Mar 2004
Location: Pacifica, CA
Posts: 348
|
Thanks for the bad news-it does seem weird though.
|
November 26th, 2007, 11:52 PM | #4 |
Major Player
Join Date: Dec 2005
Location: Melbourne, Australia
Posts: 595
|
I guess it just costs a bit more in electronics so companies like Sony and Panasonic just leave these things out. One of the things that REALLY annoys me is that you can't get composite and component out of a HVX at the same time. I think this is the same on the Sony Z1P. Oh well!
|
| ||||||
|
Thread Tools | Search this Thread |
|