Power supply failure
Thought you Z7 users may want to know about a problem i just had with one of my Z7s. A failure occured with the power supply circuitry. What was happening was the camera would power up, run briefely then go dead. I'd sit the camera down and it would power up again by itself and run for a time then shut down. I'd pick the camera up and it would power up again and shut down.
I took it to a Sony repairer who said it was a circuitry failure. I recieved a rude shock when I was told that the power circuitry is on the same board as some of the cameras other circuitry and this complete board had to be replaced, $900 AUD + labour (ouch!). Don't know what caused the problem unfortunately but the camera is running beautifully again now. Wondering if anyone else has experienced this? |
Does the power supply/charger charge battery at all? If it still charge battery, could be a loose connection wire from charger to the camcorder.
Jun |
Hi Jun,
My batteries charged fine and the charger works perfectly. I tried quite a few batteries initially thinking it was a battery failure but the problem ended up being with the circuitry taking the power from the battery. |
Hi Jon, If it is still charging you should not have it for service, you can always use battery when capturing. $900 plus labor is too expensive. Or you should have just ordered a new one at B&H for only $93.95 here.
AC-VQ1050 Jun |
Hi Jun,
The problem was not the battery but the circuitry that takes the power from the battery into the camera. I wish it had only been a battery problem. |
That is a very rare problem happening, are you using a third party battery?
Jun |
Hi Jun,
I'm using Sony original batteries. The camera is working fine now with the same batteries. |
All times are GMT -6. The time now is 07:57 AM. |
DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network