Seeing FS700 SDI and HDMI on Marshall Monitors at DVinfo.net
DV Info Net

Go Back   DV Info Net > Sony XAVC / XDCAM / NXCAM / AVCHD / HDV / DV Camera Systems > Sony Digital Cinema Camera Systems > Sony NXCAM NEX-FS700 CineAlta

Sony NXCAM NEX-FS700 CineAlta
4K EXMOR sensor with SDI, slow-motion recording.

Reply
 
Thread Tools Search this Thread
Old March 31st, 2013, 10:42 AM   #1
Regular Crew
 
Join Date: Apr 2012
Location: St. John's, NL
Posts: 41
Seeing FS700 SDI and HDMI on Marshall Monitors

Hi,

I am only able to see the component output from my FS700 on my Marshall monitor. The monitor won't read the HDMI or SDI outputs (or maybe even the camera isn't sending the video which makes less sense). I am hoping that there is a setting somewhere I can change on either unit to fix this. If you have any suggestions, please send along.

I have a Marshall V-LCD70XBH-HDMIPT.
Peter Walsh is offline   Reply With Quote
Old April 1st, 2013, 07:55 AM   #2
Sponsor: Westside AV
 
Join Date: Dec 2008
Location: Mount Washington Valley, NH, USA
Posts: 1,365
Re: Seeing FS700 SDI and HDMI on Marshall Monitors

Set output to 60i or 50i on the 700.

This does not effect recording, but makes it possible for the many monitors to see the signal.
__________________
Olof Ekbergh • olof@WestsideAV.com
Westside A V Studios • http://www.WestsideAVstore.com/
Olof Ekbergh is offline   Reply With Quote
Old April 1st, 2013, 04:00 PM   #3
Regular Crew
 
Join Date: Apr 2012
Location: St. John's, NL
Posts: 41
Re: Seeing FS700 SDI and HDMI on Marshall Monitors

Hello Olaf,

Thank you. Can you be a little more specific. Where/what menu on the camera is this?
Peter Walsh is offline   Reply With Quote
Old April 1st, 2013, 05:38 PM   #4
Regular Crew
 
Join Date: Dec 2009
Location: BOLTON ENGLAND
Posts: 77
Re: Seeing FS700 SDI and HDMI on Marshall Monitors

Hi Pete Its in the VIDEO OUTPUT second section down when you press menu on the camera mine is set to 1080I/576I set it to that and it should be fine (probably so long as your on pal camera system i did'nt look were you are based) Wilf.
Wilf Davies is offline   Reply With Quote
Old April 2nd, 2013, 12:15 PM   #5
Regular Crew
 
Join Date: Apr 2012
Location: St. John's, NL
Posts: 41
Re: Seeing FS700 SDI and HDMI on Marshall Monitors

Hi

Thanks to both of you for your replies. I thought this was the menu section but wanted to double check. It appears my Marshall does not like the FS700.
Peter Walsh is offline   Reply
Reply

DV Info Net refers all where-to-buy and where-to-rent questions exclusively to these trusted full line dealers and rental houses...

B&H Photo Video
(866) 521-7381
New York, NY USA

Scan Computers Int. Ltd.
+44 0871-472-4747
Bolton, Lancashire UK


DV Info Net also encourages you to support local businesses and buy from an authorized dealer in your neighborhood.
  You are here: DV Info Net > Sony XAVC / XDCAM / NXCAM / AVCHD / HDV / DV Camera Systems > Sony Digital Cinema Camera Systems > Sony NXCAM NEX-FS700 CineAlta

Thread Tools Search this Thread
Search this Thread:

Advanced Search

 



All times are GMT -6. The time now is 03:18 AM.


DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network