DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   Sony NXCAM NEX-FS700 CineAlta (https://www.dvinfo.net/forum/sony-nxcam-nex-fs700-cinealta/)
-   -   When in SQ mode camera shows flashing FMU (https://www.dvinfo.net/forum/sony-nxcam-nex-fs700-cinealta/523931-when-sq-mode-camera-shows-flashing-fmu.html)

Mal Hamilton July 2nd, 2014 03:49 AM

When in SQ mode camera shows flashing FMU
 
Hi
I've had a problem today trying to record slomo to an SDHC card via the SQ button. For some reason the camera has FMU flashing with a line through it. There is no FMU installed, so just wondering why I can't record to the SDHC card.
Regards
Mal
Digibeta Video,
Sydney AUstralia

Christopher Young July 3rd, 2014 03:48 AM

Re: When in SQ mode camera shows flashing FMU
 
Mal ~

Going from memory, go to MENU and select the double headed arrow which is the REC/OUT SET menu then go down to and select MEDIA SELECT and under that menu is should be set to MEMORY CARD. Me thinks it's set to FMU :) From memory a warning will flash if no FMU is installed and that menu is set to FMU.

If that's not the case I'll have to look at the camera.

Chris Young
CYV Productions
Sydney

Mal Hamilton July 6th, 2014 11:47 PM

Re: When in SQ mode camera shows flashing FMU
 
Thanks Chris
I think the camera must have defaulted to the FMU when I forgot to switch off.
All good now.
Cheers
Mal


All times are GMT -6. The time now is 03:37 PM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2021 The Digital Video Information Network