|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
July 2nd, 2014, 03:49 AM
|
#1 |
|
New Boot
Join Date: Apr 2007
Location: Sydney, Australia
Posts: 10
|
When in SQ mode camera shows flashing FMU
Hi
I've had a problem today trying to record slomo to an SDHC card via the SQ button. For some reason the camera has FMU flashing with a line through it. There is no FMU installed, so just wondering why I can't record to the SDHC card. Regards Mal Digibeta Video, Sydney AUstralia |
|
|
|
July 3rd, 2014, 03:48 AM
|
#2 |
|
Trustee
Join Date: Apr 2008
Location: Sydney Australia
Posts: 1,554
|
Re: When in SQ mode camera shows flashing FMU
Mal ~
Going from memory, go to MENU and select the double headed arrow which is the REC/OUT SET menu then go down to and select MEDIA SELECT and under that menu is should be set to MEMORY CARD. Me thinks it's set to FMU :) From memory a warning will flash if no FMU is installed and that menu is set to FMU. If that's not the case I'll have to look at the camera. Chris Young CYV Productions Sydney |
|
|
|
|
July 6th, 2014, 11:47 PM
|
#3 |
|
New Boot
Join Date: Apr 2007
Location: Sydney, Australia
Posts: 10
|
Re: When in SQ mode camera shows flashing FMU
Thanks Chris
I think the camera must have defaulted to the FMU when I forgot to switch off. All good now. Cheers Mal |
|
|
|
|
| ||||||
|
||||||
| Thread Tools | Search this Thread |
|
|
