|
|||||||||
|
Thread Tools | Search this Thread |
July 10th, 2004, 11:53 AM | #1 |
Regular Crew
Join Date: May 2004
Location: Fairfax, VA
Posts: 31
|
PD-150 sound setup
Need to be able to use the camera mic as one input, and hook an XLR into the other input. Have found I can get the XLR input in and working if I run it into Input 2, but then can not seem to be able to get the camera mic sound coming into Input 1. Don't have a manual, as I am renting the camera. What settings do I need to have on the camera to make this work?
__________________
Sharon Lawler Visit www.picturethisvideo.net for rates and availability! |
July 10th, 2004, 02:27 PM | #2 |
Wrangler
Join Date: May 2002
Location: Vallejo, California
Posts: 4,049
|
The channel 1 switch should be set to channel 1 only and the phantom power should be on.
Check the menu to make certain the sound level controls are in manual and are split.
__________________
Mike Rehmus Hey, I can see the carrot at the end of the tunnel! |
| ||||||
|
Thread Tools | Search this Thread |
|