PD 150, what does the Noise Reduction? at DVinfo.net

September 5th, 2002, 07:55 PM

HI,
does anyone know what the noise reduction NR setting does on the PD150? It seems that the Wind setting takes out the lower frequencies (Is that then a low pass / low cut filter, or a high pass filter?), but I can't hear a difference in the settings with the NR setting?
Thanks a bunch,
Brian Slanger
www.brianslanger.com

Mike Rehmus · September 6th, 2002, 10:10 AM

I'm not certain just what Sony intended here as they have nothing about it in their Operator's Manual.

What it does do is add a ringing to the audio (in my experience) at the end of a distinct sound. That drove me nuts during a voice-over recording I did when the 150 was brand new.

I think this is one option that should have only one selection . . . OFF!

September 5th, 2002, 07:55 PM	#1
bslanger Posts: n/a	PD 150, what does the Noise Reduction? HI, does anyone know what the noise reduction NR setting does on the PD150? It seems that the Wind setting takes out the lower frequencies (Is that then a low pass / low cut filter, or a high pass filter?), but I can't hear a difference in the settings with the NR setting? Thanks a bunch, Brian Slanger www.brianslanger.com

September 6th, 2002, 10:10 AM	#2
Mike Rehmus Wrangler Join Date: May 2002 Location: Vallejo, California Posts: 4,049	I'm not certain just what Sony intended here as they have nothing about it in their Operator's Manual. What it does do is add a ringing to the audio (in my experience) at the end of a distinct sound. That drove me nuts during a voice-over recording I did when the 150 was brand new. I think this is one option that should have only one selection . . . OFF! __________________ Mike Rehmus Hey, I can see the carrot at the end of the tunnel!