PD-150 gives Black & White image off s-video? at DVinfo.net

Carl Merritt · May 5th, 2005, 02:41 PM

Anyone know why a video would playback fine on the pd150 LCD, but the video outs are noisy and B&W?

Mike Rehmus · May 5th, 2005, 03:11 PM

If you are coming out with S-Video, then the answer is the connector or the cable is bad as you are only getting the luminance signal, not the chrominance signal.

Carl Merritt · May 5th, 2005, 04:34 PM

Thanks for the quick reply, Mike.

Actually I finally figured out that the Producer, who swore up and down the footage was NTSC, was wrong. The footage he sent me was PAL.

Once I switched the deck to PAL, all is good.

Thanks again.

May 5th, 2005, 02:41 PM	#1
Carl Merritt Regular Crew Join Date: Apr 2004 Posts: 60	PD-150 gives Black & White image off s-video? Anyone know why a video would playback fine on the pd150 LCD, but the video outs are noisy and B&W?

May 5th, 2005, 03:11 PM	#2
Mike Rehmus Wrangler Join Date: May 2002 Location: Vallejo, California Posts: 4,049	If you are coming out with S-Video, then the answer is the connector or the cable is bad as you are only getting the luminance signal, not the chrominance signal. __________________ Mike Rehmus Hey, I can see the carrot at the end of the tunnel!

May 5th, 2005, 04:34 PM	#3
Carl Merritt Regular Crew Join Date: Apr 2004 Posts: 60	Thanks for the quick reply, Mike. Actually I finally figured out that the Producer, who swore up and down the footage was NTSC, was wrong. The footage he sent me was PAL. Once I switched the deck to PAL, all is good. Thanks again.