|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
April 8th, 2009, 11:49 AM
|
#1 |
|
Regular Crew
Join Date: Aug 2007
Location: Lawrenceville, GA
Posts: 69
|
EX-1 and On Camera SD Monitor...Please Help
Ok So I have an EX-1 and I just got an external monitor from a stabilizer which I purchased from varizoom...for some reason the monitor doesn't work...it says "no signal"..this is what I did
1. From EX1 I took a BNC cable out of the "SDI-Out" Port 2. The other end of the cable was hooked up directly into the Video In 3. Turned On The Monitor and The Camera 4. From the camera's Menu, I did the following: a. Went To the "Video Set" option in the Menu b. Turned "On" the "video out display" & set the "YPbPr/SDI Out" to HD This didn't work so I set the "YPbPr/SDI Out" to SD... Still no luck...what am I missing over? |
|
|
|
April 8th, 2009, 11:55 AM
|
#2 |
|
Regular Crew
Join Date: Jan 2009
Location: Wales UK
Posts: 121
|
you need the composite cable not the SDI cable - SDI is a digital signal for studio type working
|
|
|
|
|
April 9th, 2009, 10:37 AM
|
#3 | |
|
Regular Crew
Join Date: Aug 2007
Location: Lawrenceville, GA
Posts: 69
|
Quote:
|
|
|
|
|
|
| ||||||
|
||||||
|
|
