|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
April 25th, 2009, 12:03 PM
|
#1 |
|
Regular Crew
Join Date: Jan 2006
Posts: 28
|
EX3 SDI out not working
Has anybody experienced their SDI out spigot suddenly ceasing to work. I 've troubleshot this from several angles and it just seems to have stopped working. The same set-up from my 350 to the monitor works fine so I know it's not on that end of the set-up.
Thanks Warren Gentry |
|
|
|
April 25th, 2009, 06:28 PM
|
#2 |
|
Major Player
Join Date: Sep 2008
Location: Vancouver, Canada
Posts: 975
|
Hopefully the BNC connector has not become "unhinged" from the circuit board inside the camera. I recall the BNC connectors are connected right to circuit boards inside the EX cameras which means they are prone to becoming disconnected due to the torquing from connectors over time.
Hope I am wrong. Probably covered under warranty if it doesn't look like abuse. |
|
|
|
|
April 26th, 2009, 08:02 AM
|
#3 |
|
Major Player
Join Date: Apr 2007
Location: Fletcher Hills, CA
Posts: 211
|
See pages 107 and 109 in the manual - ILink must be disabled in menu for SDI out to work.
|
|
|
|
|
April 28th, 2009, 10:00 AM
|
#4 |
|
Regular Crew
Join Date: Jan 2006
Posts: 28
|
Thanks Ronn, That was the problem
|
|
|
|
|
| ||||||
|
||||||
| Thread Tools | Search this Thread |
|
|
