S&Q motion with Transcent class 10 at DVinfo.net

Luben Izov · July 6th, 2010, 06:24 PM

Does anyone know if Transcend 16GB class 10 is good for Q&S motion with EX3?
16GB SDHC CARD (SD 3.0 SPD Class 10)
Thank you

Luben Izov · July 7th, 2010, 11:28 AM

Anyone that has used Transcend class 10 for S & Q motion? I am wiling to buy it, but not sure if would do the job with EX 3 or any other EX.
Thank you

Piotr Wozniacki · July 7th, 2010, 12:01 PM

Luben,

I'd seriously recommend sticking to those SDHC cards that have been tested, approved and recommended by the leading adapters manufacturers - especially MxM Express.

Otherwise, it might be a lottery.

Luben Izov · July 7th, 2010, 01:56 PM

Thanks Piotr! I just ordered two cards. If does not work for cranking I aways could use it for regular recording with EX3 and/or with my Tascam sound recorder. Cheers

Dave Morrison · July 7th, 2010, 08:46 PM

Hey, on a related note, has anybody figured out how we lost those two minutes on the 8 gig SxS cards when the last firmware was released? I know others said they too went from 28 minutes of recording time to 26 minutes right after the FW updater. Is it being used in some sort of record buffer configuration?

Colin Rowe · July 10th, 2010, 10:43 AM

Quote:

Originally Posted by Luben Izov

Anyone that has used Transcend class 10 for S & Q motion? I am wiling to buy it, but not sure if would do the job with EX 3 or any other EX.
Thank you

No problem with Transcend class class 10. I have been using 2 for the last couple of months, no problems whatsoever.
EX1 Firmware ver 1.20

Craig Seeman · July 10th, 2010, 05:01 PM

Quote:

Originally Posted by Dave Morrison

Hey, on a related note, has anybody figured out how we lost those two minutes on the 8 gig SxS cards when the last firmware was released? I know others said they too went from 28 minutes of recording time to 26 minutes right after the FW updater. Is it being used in some sort of record buffer configuration?

Probably a record buffer. It's probably why even "lower quality" SDHC cards now work and many of the faster cards can overcrank as well as SxS cards. By using the card as part of the buffer at alleviates the burden of the write to card speed. The reasons why cards would result in media errors was that the buffer would fill faster, over time, than it could write to the card. In effect the card is being used as a form of virtual memory I suspect.

I have a hunch the issue was either add a small pre-record cache or make the SDHC cards more reliable and the latter won out.

Luben Izov · July 11th, 2010, 11:41 AM

Quote:

Originally Posted by Colin Rowe

No problem with Transcend class class 10. I have been using 2 for the last couple of months, no problems whatsoever.
EX1 Firmware ver 1.20

Thank you Colin. I have them on my way...
Cheers

July 6th, 2010, 06:24 PM	#1
Luben Izov Major Player Join Date: Nov 2009 Location: White Rock Posts: 254	S&Q motion with Transcend class 10 Does anyone know if Transcend 16GB class 10 is good for Q&S motion with EX3? 16GB SDHC CARD (SD 3.0 SPD Class 10) Thank you Last edited by Luben Izov; July 7th, 2010 at 01:52 PM.

July 7th, 2010, 11:28 AM	#2
Luben Izov Major Player Join Date: Nov 2009 Location: White Rock Posts: 254	Anyone that has used Transcend class 10 for S & Q motion? I am wiling to buy it, but not sure if would do the job with EX 3 or any other EX. Thank you Last edited by Luben Izov; July 7th, 2010 at 01:52 PM.

July 7th, 2010, 12:01 PM	#3
Piotr Wozniacki Inner Circle Join Date: Aug 2006 Location: Poland Posts: 4,086	Luben, I'd seriously recommend sticking to those SDHC cards that have been tested, approved and recommended by the leading adapters manufacturers - especially MxM Express. Otherwise, it might be a lottery. __________________ Sony PXW-FS7 \| DaVinci Resolve Studio; Magix Vegas Pro; i7-5960X CPU; 64 GB RAM; 2x GTX 1080 8GB GPU; Decklink 4K Extreme 12G; 4x 3TB WD Black in RAID 0; 1TB M.2 NVMe cache drive

July 7th, 2010, 08:46 PM	#5
Dave Morrison Major Player Join Date: May 2002 Location: West Central Florida Posts: 762	Hey, on a related note, has anybody figured out how we lost those two minutes on the 8 gig SxS cards when the last firmware was released? I know others said they too went from 28 minutes of recording time to 26 minutes right after the FW updater. Is it being used in some sort of record buffer configuration? __________________ EX1, Nikon D750 http://www.morrisonphotographics.com http://www.heritagefilm.com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

July 7th, 2010, 01:56 PM	#4
Luben Izov Major Player Join Date: Nov 2009 Location: White Rock Posts: 254	Thanks Piotr! I just ordered two cards. If does not work for cranking I aways could use it for regular recording with EX3 and/or with my Tascam sound recorder. Cheers