DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   Sony XDCAM PMW-F3 CineAlta (https://www.dvinfo.net/forum/sony-xdcam-pmw-f3-cinealta/)
-   -   External EVF vs monitor? (https://www.dvinfo.net/forum/sony-xdcam-pmw-f3-cinealta/497419-external-evf-vs-monitor.html)

Dennis Dillon June 26th, 2011 12:54 PM

Re: External EVF vs monitor?
 
Doug,
Just checked the Z site
"The Zacuto EVF is a 3.2” high resolution monitor that is used in conjunction with all the Z-Finder models. "

Doug Jensen June 26th, 2011 01:02 PM

Re: External EVF vs monitor?
 
Dennis, I'm glad you figured it out because I wouldn't have known the answer.

Mark OConnell June 26th, 2011 04:31 PM

Re: External EVF vs monitor?
 
I wish Redrock would get their EVF out the door.

Redrock Micro - microEVF

Matthias Sachal July 2nd, 2011 05:41 AM

Re: External EVF vs monitor?
 
Quote:

Originally Posted by Doug Jensen (Post 1660597)
I have tried it and it doesn't work. The placement is all wrong ergomonically and the LCD panel itself is not strong enough or rigid enough to support the weight and pressure.

Hey, I got the Hoodman now and I have to disagree. For me it works very good, especially with an articulating arm holding it in place additonally. But I also have to say I configured my Rig to be back heavy.

http://dl.dropbox.com/u/18368412/DSC_5581.jpg

http://dl.dropbox.com/u/18368412/DSC_5579.jpg

Thierry Humeau July 2nd, 2011 11:04 AM

Re: External EVF vs monitor?
 
Hi Matthias,

What brand is the short atculate arm you are using to support it? Looks good.

Thierry.

Matthias Sachal July 3rd, 2011 05:06 AM

Re: External EVF vs monitor?
 
Its a Cineroid. But the exact same arm gets branded for other companys also. It was pretty cheap, you get the exact same one from Ikan for example. The quality is really good and it locks down tight.

Ron Wilk July 12th, 2011 08:44 AM

Re: FYI:Case for the Zacuto EVF Pro
 
Since its arrival, I have been perplexed by the accompanying soft case. It seems that the EVF has to be disassembled in order for part of it to fit within the case, the remainder goes where?
A call to Zacuto in search of a carry case for the entire unit proved fruitless. However, a search through my equipment closet revealed an unoccupied Cannon telephoto lens case (200mm)—problem solved. The entire assembled EVF fits inside with room to spare. And a small piece of cut foam placed beneath the EVF allows the charger to sit inside the case beneath the EVF. When I have a moment I will take a photo and post it.

Andrew Stone July 15th, 2011 10:39 PM

Re: External EVF vs monitor?
 
Unboxing video of the new SmallHD DP4-EVF. Gives you a fairly good sense of the unit...


Brian Drysdale September 27th, 2011 02:00 AM

Re: External EVF vs monitor?
 
Here's another new V/F:

Kinotehnik - Overview

Andrew Stone September 27th, 2011 06:45 PM

Re: External EVF vs monitor?
 
To add to Brian's post Jon Fauer's site Film & Digital Times has a short piece on said EVF...

Kinotehnik LCDVFe | Film and Digital Times: News

Steve Kalle October 9th, 2011 08:33 PM

Re: External EVF vs monitor?
 
I have used both the Zacuto EVF and the TVLogic. The quality of the Zacuto's screen does not seem very good whereas the TVLogic is amazing. Without peaking, neither is good enough for very accurate focusing, mainly due to their small size. When using the TVLogic, I found it easy enough to get accurate focus. However, for shoulder mount shooting, the Zacuto was better when I didn't have to walk and pull focus while the TVLogic was a little easier to walk around and pull focus (using a Zacuto FF). I used a Zacuto articulating arm to attach them, which I also have used with a PIX240.


All times are GMT -6. The time now is 03:46 PM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network