![]() |
Who here is in Seattle, WA?
Hi there
I thought I'd send a note, since we're so close (I'm in Vancouver) and shoot down in Seattle sometimes. Is anyone here from Seattle? I noticed a few guys in the past, on here, but they don't seem to get email from their profiles here. Bonus points if you own a Sony, haaa. |
I'm in Seattle. Well, north of Seattle in Mill Creek, specifically. My day job is in Redmond.
As for the bonus points: I am the proud less-than-one-week owner of a PDX10. Bought it from a member of this very board, in fact. |
Yes! High five! The PDX10 rocks.
|
I'm from Kent, 5 minutes drive to Seatac Airport. I have PD170 and VX2100. Daytime Electronics Technician job.
|
Rain City...
I'm in Seattle. Alas, you are out of luck on the Sony ownership issue. I haven't bought anything yet, but after comparing specs and user reports, I think the Canon XL-2 is the best bet for the money I can afford to spend. Also, I know another user and having the same model obviously makes collaboration easier. I primarily came into film making as a way to get my own projects shot, and I have very little in the way of practical filming experience. My interests actually lie closer to the writing acting end of the business, but once I have the equipment I'll undoubtably doing some filming for local bands and shows at the very least, simply by virtue of being 25 in an art mad city. If you need help with a project, I'd be happy to consider it just for the experience on the other side of the camera. I am reasoonably computer literate and can wind up a cord as quickly as the next man. My primary email is easyliving@gmail.com
|
Hi Ronald,
Thanks for the email. Im still in Seattle area. I have a Sony HDR-FX1 and use Vegas 6. I get bonus points? :) However, I havent used my stuff since March so...I may be putting the camera on ebay or something. Then when I get more time to do video I'll get a new cam, maybe one of the new panasonic HD disk based cams or something in the future. Right now ive been working 80 hours a week at my regular day job :( Sux to be me! :) |
Hi, just sent you all an email. Rich can you email me? Your account didn't have email.
|
Hi Ronald;
I live in Kent and manufacture the RONSRAIL equipment, primarily for the Canon XL series camera's and long lens combo's. I do wildlife and found I needed more stability using the long lenses,also found it hard to find the subject with the limited FOV afforded those lenses. Hence, the RONSIGHT and RONSRAIL. No bonus points??? |
Hi Ronald;
I live in Kent and manufacture the RONSRAIL equipment, primarily for the Canon XL series camera's and long lens combo's. I do wildlife and found I needed more stability using the long lenses,also found it hard to find the subject with the limited FOV afforded those lenses. Hence, the RONSIGHT and RONSRAIL. No bonus points??? Best; Ron Sorry about the lack of address in the previous and erroneous post!! |
Aloha neighbors!
|
I'm out here in Bremerton, across the Sound... Nice to meet you!
Regards, |
I live in West Seattle. Ron I've seen your rail at Glazers. Nice rig. I guess I get no bonus points since I own a Canon XL2 and a Panasonic GS400. Wait, I almost forgot, I do own a Sony Digital8 camcorder. Does that count for something? :)
|
Puyallup, home of the Fair and Me...
I live in Puyallup which is about 45 minutes from Seattle (depending on how many cars are on the road). I own a Canon GL1 and hope to get a HDV cam this year. I work for a government cable channel and also do some freelance editing and videography on the side. This is a great site to learn about video gear. If anybody wants to hang out and talk about video stuff send me an email.
|
Seattle Resident
Writing to say Hi from Seattle. It's good to see there are other people in the 'neighborhood'.
People seem to post their favorite (H)DV shooting and editing flavors here, so I'll do the same; My recent projects as a shooter have been with the Canon XL1S, XL2, and the Panasonic DVX-100. I've used GL2s and a few JVC studio models too. I edit with my own Avid Express Pro HD / Protools system. Don't have a camera yet, but I'll be buying one sometime in the next few months and I'm on the fence at the moment about making the $$ commitment to an HDV camera and editing system upgrade. Maybe I'll stick with DV for another year and wait for the next wave of HDV equipment. Well, Spring (and then Summer) is on its way, so cheers to having better shooting conditions for everybody here in the NW. |
Auburn otherwise known as Slaughter Wa.
Auburn was previously known as Slaughter, Wa after Sgt. Slaughter. No joke.
Own a FX-1, and recently the Letus35 Flip (Thanks Quyen). Using Vegas Movie Platnum. Volunteering my time to a Korean TV channel KO-AM tv but proudly working for the government. Should set up some type of monthly meet and greet type of setting. |
Jet City!
Born & Raised is Seattle, Granite Falls is home now... Just a bit of a drive...
About to buy Sony's HVR-A1U.. |
We have a studio up north of Seattle in beautiful Mukilteo.
Mostly a Canon shop, but have a few Sony's. Just a couple quick local places you guys might want to check out: http://911media.org/ http://dbug.org/sigs/digvideo/ http://www.wigglyworld.org/ http://whatcomfilmandvideo.com/ |
what's up everyone. i live in seattle near madrona. i shoot with an hvx200 and edit with final cut. just put down a deposit on a red... anyone have a spare 20 grand now that you know i'm your neighbor?
-mike |
I live in seattle. If you need stock let me know.
|
Hi all!
I'm a student in Seattle. I just bought a GL2 and have an Optura 10 and I edit on Adobe Premiere. At work I get to use Panasonic DVX100's and Final Cut Pro. I am working toward a career in advertising where I can use my video knowledge, as well as graphic design and puppetry experience, for television commercials and short films. |
Also from West Seattle here. Shoot mainly with a DVX100A and cut with vegas, and do mostly independent contract work for various productions studios around here. Currently working on getting an A1 when they become available.
|
Feet are again getting wet
PUYALLUP is now home after a loooong career in commercial and public broadcasting (KING-TV & KCTS/9) both as a tech and talent. First camera I worked on was a RCA TK30 - 1952 era. First editing was with a razor blade and a microscope - 1956 era. First big shoot was on the Apollo 17 (last moon walk) landing in the South Pacific. My how times have changed.....a GL2 is my current toy.
|
I'm in Everett. Some of my friends who live in Tacoma consider Everett at the edge of the world :) I have a XL2, Mac G4 w/FCP4 & 5, a Firestore 4. Hope all on this side off the States are doing well :) I work full time for Comcast Cable, (unfortunetly not with video, but as a Dispatcher), but have been freelancing in video production as a camera man and editor. In the middle of working on a Industrial type short for Boeing. I love my XL2! It rocks!!
Those of you who have used Glaziers in Seattle, I've decided to stop using them for rentals. They now require a deposit for the amount of the actual worth of the equipment!!! (didn't matter that I've been renting from them for years.) I'll just go to Victory Studios. Perhaps a little higher on their rental rates, but better than having to make sure I have 1400.00 available on my credit card to rent a Wide Angle lense for the XL2. Could you imagine if wanting to rent something like the XL H1 from Glaziers, having to put $9,000.00 deposit down!!! Rediculous. they should do like Victory does, if you don't have your own insurance, charge 20% more on the rental. Sorry for the venting... Joe |
Officially moving from Burbank, CA to Shoreline, WA with my wife in five days.
Will be doing freelance prop design full time for my normal animation biz job for about a year but ready to make the move to doing my film/digital stuff all the time. I have an Xl2 and DVX100B and cut in FCP and sometimes iMovie because it's stupidly simple... just like me. |
West Seattle here...
I am a senior editor/producer by day and a mad indie filmmaker by night and weekends. I have pushed my XL1s to the limit and sold it this week to make way for my A1 - pre-ordered from B&H.
I edit on an Intel iMac FCP 5.1 as well as the Adobe production suite on my XPS PC. I have all the suspect gear including boom, shotgun mic and lights. Shooting my next feature this spring and would love to meet some other indies for possible crew swapping. Check out my website if interested: www.CodemanStudios.com Ciao! |
Shoreline
Hey all,
I recently moved back to the Seattle area after ten years in L.A. I shot my first feature this past summer in Skagit Valley on a GY-HD100. Our website is: www.bigplansthemovie.com I'm now wrestling with editing HDV in FCP. I struggled with Lumiere, then decided to wait for the 5.1.2 update. Now I'm trying to capture my footage without losing any of it. If there are any experts out there, I could use all the help I can get. I'm also interested in creating a real film community here. There is a lot of filming going on here, but no one knows about it and there are few outlets, and not much publicity. I can easily imagine a regular feature in either the Stranger or the Weekly (or both) on local production. Whadaya think? |
Welcome back!
|
Hi,
I'm new to the area. I've got a XL1s and am willing to help out on about any project. |
State Capitol Checking in ...
Looks like I'm the southern most to check in for now...
I'm down at The Evergreen State College in Olympia, and currently taking a year long program entitiled MediaWorks. In the spring I'll be headed to the Yellowstone area to document the new baby animals for my final project. I've played with some video, and did a cooking show for Campus TV a few years ago when I started college here by using palmcorders and iMovie. I have also completed a short, playful video on coyote pups. For those w/ quicktime here is the web address for it ... it was shot using a Nikon fieldscope with an eyepiece CCD patched into a palmcorder to record the analog output. http://academic.evergreen.edu/s/stid...CoyotePups.mov Currently I use an XL2 and have two G4 laptops to work with. For audio I capture it on a Marantz PMD671. Anyway, thought I'd check in, even though those in Seattle may say I am too far south, it's only a short drive north from here to there. |
Everyone, try
http://www.nwfilmforum.org/ This seems to be one of the biggest things for indie /semi-pro? film going on here in the city. I'm going to become a member for the sake of networking and supporting the cause. |
Quote:
|
Hi Everyone,
I live in Redmond , WA and shoot mostly stock HD footage. JVC GY-HD100U, XL1, FCP5.1, Shake, Premiere Pro, Cubase SX, and host of midi gear. Mack, looks like we're doing to same kind of work - maybe we can hook up sometime. My web site will be under construction for several months, fusionhidef.com. Personal email is j_clark@comcast.net. Thanks, Jeremy |
Looking for a parking spot in Seattle for a month - Jan 07
Hey Seattle guys,
Anyone have any relatively secure extra space in their driveway or garage for a Nissan Xterra for a month. We're flying to Costa Rica for a month - out of Seattle. From Jan 9th to Feb 11th, 2007. Will pay up to $150 or so. Ideally closer to the airport would be better. I can be reached here or by phone at 1-800-518-8378. Thanks. |
New to town. Have gear will travel, but mostly just sayin hi.
Wow, nice to see theres a thriving community here. Just moved from Denver CO and was unsure as to who Id find to work with but looks like alot of good people in town with great cameras.
If anyone needs Use of a JVC HD100U/A with HHD recording, Steadicam work or use of a one ton G and E truck let me know. trying to make contacts and stay busy, on the same note I might have a multicam shoot coming up and might need 3 more cameras so ill post here first. Gear list and reel on my site www.andersonlivemedia.com Drop a line to say hi! |
Shawn, welcome to Seattle. I'm just getting started with my JVC 110U, shooting mostly scenics & outdoor footage right now. Would you be willing to teach lessons?
Thanks Jeremy |
Sure! not sure what I can teach you as Im not sure as to what level your knowledge is at but Id be happy to talk shop with you. Im at 303-875-1177.
|
Saying Hi!
Just dropping a quick line to say hello. I'm a DP/Editor with experience in the Music Industry side of things. I have experience as a Producer and Director but have a mad passion for shooting and editing. I own an Panasonic HVX200 and a Sony PD150. I edit primarily in Vegas but can do all PC apps. I love After Effects. Live on North East Side of Seattle
...D... |
Quote:
Joe |
I love it
So far so good...I have only shot test footage so far but it looks great. I love the work flow of the P2 cards and the varicam style of shooting it provides. Although it is not a varicam I think it is amazing. I wish you luck with your shoot and if you're needing a second hand with it, shoot me an email
...D... |
New to this forum, and new to Seattle. Actually live in Orting. Moved here from Oklahoma back in August of '06.
Just made the jump into HDV from DV. Currently own the XH-A1 (former GL-2 owner). Do a lot a nature stuff, avid storm chaser. www.billygriffin.com Hope to find someone local with some editing equipment / reasonable rates. bgriffin70@comcast.net |
All times are GMT -6. The time now is 05:25 PM. |
DV Info Net -- Real Names, Real People, Real Info!
1998-2025 The Digital Video Information Network