DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   Tripod Sticks & Heads (https://www.dvinfo.net/forum/tripod-sticks-heads/)
-   -   Tripod suggestions for Canon XH A1 (https://www.dvinfo.net/forum/tripod-sticks-heads/84267-tripod-suggestions-canon-xh-a1.html)

Bill Pryor June 12th, 2009 09:59 AM

The Libec 38 is what I use. I think it's about the cheapest one you can get that's adequate for the camera and doesn't have "bounceback" at the end of a pan.

The smaller and cheaper Libec 22 is very smooth but just a bit undersized for the camera's weight. However, it can be used if you have a steady hand, and use the horizontal lock at the end of a pan--there's just a bit of bounceback to it but it is controllable. It's difficult to do perfect moves with the 22 when zoomed in very far, and it doesn't go up high enough to suit me. I got one when I first bought the camera because I wanted something very light weight. It was useable and I liked it for the compact size and weight, but I sold it and got the 38. I have the TA-100 tripod adapter plate, a bellows matte box, 4X4 filters, a shotgun mic and wireless mic attached to the camera, so it was a bit too heavy for the 22.

A good place to buy a Libec in the U.S. is from Tapeworks Texas, a sponsor here. They were cheaper than B&H when I got mine.

Michael Hutson June 12th, 2009 04:40 PM

I have a Matthews 25 and am very satisfied for the price.
http://www.videomaker.com/article/13346/

http://www.bhphotovideo.com/bnh/cont...=REG&A=details

Robert Wide June 13th, 2009 03:00 PM

I did an extensive search which resulted in a Libec 38, bought it a few moths ago and am very happy with the robust design and smooth pans!

RW

Danny Winn June 14th, 2009 09:28 AM

I've happily used the "Sunpak 7575" with my heavy XL2 and now XH A1s. It can handle the weight of the XL 2 and surely the A1s, it has two quick release plates, bubble levels and a smooth 3 way pan system. The online pix don't do it justice.

It's only $80.00 It's big brother is $90.00.

Ann Bens June 14th, 2009 04:37 PM

It would not surprise me if the Matthew 25 and the Libec came from the same factrory. The look excactly the same as does the Wako tripod.
Wako en Libec both come from Wako industries.

Bill Pryor June 15th, 2009 10:15 AM

The Wako is made in China:
http://www.made-in-china.com/image/2...pod-KH-25-.jpg

Libec is a British company, with the tripods being made in Japan. The Wako could be a cheap Chinese knockoff that's equally as good, but who knows.

Tsu Terao June 15th, 2009 12:38 PM

From a post I made in Nov. '07:

I spoke with a Matthews rep, and found that the legs are actually the same as the Libec TH-M20, and the head is a new design from Matthews. It's made in Taiwan.

J. Chris Moore November 13th, 2009 02:55 PM

Tripod/Head Advice XH-A1
 
Hey guys, I'm new here to the forums and I'm still trying to learn the skills of the trade. I bought an xh-a1 recently and have been using it with a Manfrotto 503 head on Manfrotto sticks (don't know the model #). No surprise I am having the same issues a lot of you have with the 503 head. It sticks like crazy when trying to pan, it's about to drive me crazy, almost impossible to get a good smooth pan.

So my question is can you guys recommend a good tripod/head combo for around $1,200 that would meet my needs. I am shooting weddings, engagement videos and corporate stuff. But I really want my stuff to look professional and want to acquire the correct equipment in order to do so. I also am about to purchase a 7D so is there a combo that would work well for both cameras? Thanks in advance.

I know this subject has been exhausted, so even links to relevant threads would be helpful. I apologize for beating a dead horse with this thread but could really use some advice. Thanks.

J. Chris Moore November 14th, 2009 10:00 PM

Anyone? Sorry about the newb question.

Bumpity bump.......

Don DesJardin November 14th, 2009 11:44 PM

If I was looking at something to buy that would be suitable for your camera, I would seriously be looking at a Vinten Vision 3AS head. I think your existing tripod is a 75mm, so it should work on it.

Vinten | Vision 3AS Pan and Tilt Head | www.vinten.com

J. Chris Moore November 14th, 2009 11:50 PM

how does this compare to the Sachtler FSB-6? is the Sachtler worth the extra cash in you guys opinion?

Jack Walker November 15th, 2009 12:34 AM

I think the Sachtler FSB heads are worth the money. There is extensive discussion about allthe heads in this range here. Perhaps someone will put up a couple of links to those threads.

It also depends on what you are shooting. If the Bogen head is not good enough for your needs, then it is necessary to go to one of the more expensive heads. I have a Gitzo that is excellent. I have used the Sachtler and several people I know own them, and all find it an outstanding head. Some people like the Cartoni Focus, but it is a 100mm bowl and I think not as good as the Sachtler. Several people have praised the new Vinten series suggestedin another post in this thread.

I have never found the middle price heads to be worth buying, though for some people they work well from what I read.

Peter Damo November 16th, 2009 06:25 AM

Quote:

Originally Posted by J. Chris Moore (Post 1447507)
how does this compare to the Sachtler FSB-6? is the Sachtler worth the extra cash in you guys opinion?

I don't have the 3AS but the previous 3 model and I can't see any reason other than loading it up with a really heavy unit, that you would want or need to spend more money. Both the Vinten models are superb and will serve you well.

J. Chris Moore November 19th, 2009 06:59 PM

Thanks everyone for your replies. Anyone else have any advice. Will the satchler work well with a 7d also or do I need to look at a different combo for that camera?

Jay Houser November 19th, 2009 08:19 PM

I agree with the above advice regarding tripods. My previous tripods were for stills only - as long as they kept the camera off the ground they were OK.

I Shoot with a Canon XH-A1, 5D, 5Dmkii and a 7D. After researching this site on tripods, I narrowed it down to either Miller or Gitzo. I bought the Gitzo GT3541XLS after looking at the extensive selection at my local store - West Photo.

For travel I bought the Gitzo GT0540. Disassembled it fits inside my carry on.

For a head I bought a G2380 and a G2180 for my Glidecam. These work fine for the DSLR's but are somewhat difficult to level with the XH-A1 - they are both flat mounted heads.

For future use I also picked up a GS5320V 75mm bowl adapter for either a Sachtler FSB-6 or the new Vinten 3AS.

Pretty much blew the budget on tripods - now I can't afford the Sachler/Vinten head.

However, I don't think I will be forced to upgrade my tripods!


All times are GMT -6. The time now is 04:24 AM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2025 The Digital Video Information Network