|
|||||||||
|
Thread Tools | Search this Thread |
December 26th, 2007, 02:59 PM | #1 |
Regular Crew
Join Date: Jul 2005
Posts: 52
|
LMD1410 LCD PAL land not NTSC
I have LMD1410 LCD Monitor , when I used in first time I put it in NTSC area that was flaw because I am in PAL land not NTSC but when I tray to fix this flaw I didn’t find in setting how u can change it and when I read the manual said that area will show only in first time!! Any one know how I could change sting from NTSA to PAL ??
|
December 27th, 2007, 01:54 AM | #2 |
Inner Circle
|
Hi Mouayed...........
Not entirely sure I've grasped the question, but here goes...............
If the LCD screen is attached to a PC, I'm not sure why it would matter whether it's Pal or NTSC - PC's don't use either for anything. If it's being used as a television, then it should, somewhere, have a "Reset", "Redo Setup" or similar function that overides the "out of the box" setup routine. Every television I've ever seen has a setting to allow the original "setup" to be either re - done in it's entirety, or selective bits edited. Think you're going to have to give that manual a bit more effort. By the way - what, exactly, is a "LMD1410" monitor anyway - nothing I've ever heard of. Make? Manufacturer? Country? Planet? How come we don't even know what country you're in? This place gets stranger every day. CS |
December 27th, 2007, 04:37 PM | #3 | ||
Inner Circle
Join Date: Jun 2003
Location: Toronto, Canada
Posts: 4,750
|
Quote:
Quote:
|
||
| ||||||
|
Thread Tools | Search this Thread |
|