|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
July 31st, 2008, 07:57 AM
|
#1 |
|
Major Player
Join Date: Feb 2003
Location: Bay City, Michigan
Posts: 585
|
attaching HD monitor
My current set up is SD, and I run my SD "program" monitor off of firewire, thru my SD camera.
I'm going to be working on an HD project - the clips delivered to me as files on a DVD - and I'm borrowing an HD "program" monitor. My question is: Can I hook up this HD "program" monitor via firewire thru my SD camera, the same configuration I have now? Thanks for any advice you can give... Bob |
|
|
|
July 31st, 2008, 09:17 AM
|
#2 |
|
Major Player
Join Date: Dec 2007
Location: Fayetteville, NC
Posts: 535
|
Via firewire - No. Most HD monitors have either SDI or component inputs. If your camera is an SD camera it will not be able to convert your HD signal much less "see" it.
__________________
"The good thing about science is that it's true whether you believe it or not." Neil deGrasse Tyson https://www.nautilusproductions.com/ |
|
|
|
|
July 31st, 2008, 11:13 AM
|
#3 |
|
Major Player
Join Date: Feb 2003
Location: Bay City, Michigan
Posts: 585
|
so my only options for feeding an HD monitor from my workstation are thru an HD camera or an HD tape deck? or are there any other cards I can install that will allow the same thing?
Thanks for your response! |
|
|
|
|
August 27th, 2008, 07:24 AM
|
#4 |
|
New Boot
Join Date: Aug 2008
Location: Tallahassee
Posts: 14
|
I'm not sure if this is what you are looking for. I added an ATI Radeon X1650 card to my workstation. I run it to my 1080P TV. It drives both a regular LCD monitor and TV at the same time.
|
|
|
|
|
| ||||||
|
||||||
| Thread Tools | Search this Thread |
|
|
