giant squid for iriver question at DVinfo.net

Dan Trojanowski · October 26th, 2005, 05:27 PM

on the giant squid site they list a right angle adapter. is this something i will need? im purchasing 3 iriver 790's, and three giant squids. one i will get in white, also what does everyone recomend for the cord size????
thnx

Bob Costa · October 26th, 2005, 07:15 PM

Right angle plug important for 800 series, where jack is on the side. 700's have jack on the end, so right angle plug not really needed. I have rt angle on mine, but think either one would be okay.

Cord length depends on your application. Some of my cords are only 6 inches long

Mike Hardcastle · October 27th, 2005, 11:39 AM

yep as said, I have 2 x 790's and i use the straight plug in the end of the iriver works well, also 1 x 2ft lead for wedding vows and one normal i think they are 5 or 6 ft. you cant go wrong with this setup a real bargain/quality hit !!!!!

John Bennett · October 27th, 2005, 11:53 AM

I use a 3 foot cord length. The iriver goes into the groom's jacket pocket and the mic clips to his lapel, a few inches above his naval. I keep it low so that bride and groom voices will be closer to the same sound level.

Terry Lyons · October 27th, 2005, 06:45 PM

Hi Dan, I just purchased 2 mic's and when I talked to Darren he encouraged the 90 deg. ends for my 795's. I think you would be happy either way although if they are laying down in a pocket that would make them a little shorter, as to fit better in a short pocket. TAG

October 26th, 2005, 05:27 PM	#1
Dan Trojanowski New Boot Join Date: Sep 2005 Posts: 14	giant squid for iriver question on the giant squid site they list a right angle adapter. is this something i will need? im purchasing 3 iriver 790's, and three giant squids. one i will get in white, also what does everyone recomend for the cord size???? thnx

October 26th, 2005, 07:15 PM	#2
Bob Costa Major Player Join Date: Nov 2004 Location: Venice, FL Posts: 850	Right angle plug important for 800 series, where jack is on the side. 700's have jack on the end, so right angle plug not really needed. I have rt angle on mine, but think either one would be okay. Cord length depends on your application. Some of my cords are only 6 inches long __________________ You are either growing or dying.

October 27th, 2005, 06:45 PM	#5
Terry Lyons Regular Crew Join Date: Feb 2004 Location: Alta Sierra Posts: 182	Hi Dan, I just purchased 2 mic's and when I talked to Darren he encouraged the 90 deg. ends for my 795's. I think you would be happy either way although if they are laying down in a pocket that would make them a little shorter, as to fit better in a short pocket. TAG __________________ TAG

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

October 27th, 2005, 11:39 AM	#3
Mike Hardcastle Regular Crew Join Date: Sep 2004 Location: Lancs , UK Posts: 50	yep as said, I have 2 x 790's and i use the straight plug in the end of the iriver works well, also 1 x 2ft lead for wedding vows and one normal i think they are 5 or 6 ft. you cant go wrong with this setup a real bargain/quality hit !!!!!

October 27th, 2005, 11:53 AM	#4
John Bennett Regular Crew Join Date: Sep 2005 Posts: 25	I use a 3 foot cord length. The iriver goes into the groom's jacket pocket and the mic clips to his lapel, a few inches above his naval. I keep it low so that bride and groom voices will be closer to the same sound level.