What would your render settings be for this? at DVinfo.net

Alan Henderson · November 22nd, 2007, 11:33 AM

Happy Thanksgiving!

I have taken a Hi8 tape, captured it to MiniDV, re-captured to individual AVI files, added color correction, brightness and contrast, and NeatVideo noise reduction in Vegas 6.0.

Now I am ready to render.

I have done this several other times but keep having various issues.

After rendering, I will move the files into Ulead MovieFactory to export to DVD.

So, after doing lots of researching, there is quite a difference of opinion on how to best render in Vegas.

My question:

Would you go with the default or would you custom render?

Up till now, I have rendered to AVI (default settings).

If you would custom render, what would be your settings?

This is a wonderful website, by the way, and thanks for any response that comes.

alan

Mike Kujbida · November 22nd, 2007, 11:36 AM

How long is the video?
Is there a reason you're not using DVD Architect?

Alan Henderson · November 22nd, 2007, 01:33 PM

Each clip is less than 10 minutes.

No particular reason I am not using DVD Architect.

Would it be a better choice?

alan

Mike Kujbida · November 22nd, 2007, 01:55 PM

Quote:

Originally Posted by Alan Henderson

Each clip is less than 10 minutes.

But what's the total length of the video?
We need to know that to be able to give you the proper bitrate.
Or grab Vol.1 Issue #7 of Edward Troxel's newsletters as it's dedicated to DVD authoring with recommendations for bitrates for various lengths.
Or check out this bitrate calculator.

Quote:

No particular reason I am not using DVD Architect.
Would it be a better choice?

Each to their own.
However, since this is a Vegas forum , you'll find that a lot of us are more familiar with it than other apps.

Alan Henderson · November 22nd, 2007, 02:01 PM

Total length of video is 40 minutes.

alan

Mike Kujbida · November 22nd, 2007, 02:26 PM

VBR (what I'd use): 8,000,000 / 8,000,000 / 4,800,000
CBR: 8,000,000

Use the default AC-3 setting for audio.
Use the "DVD Architect NTSC video" template for video but customize it by clicking the word "Custom" (next to the render options) and then the "Video" tab.
Select either CBR or VBR and enter the above numbers.
You can save this as a preset if you want to.

Make sure both files have the same surname (i.e. myvideo.ac3 and myvideo.mpg) and go into the same folder.
That way, when you import the video file into DVD Architect, the audio file will follow automatically.

November 22nd, 2007, 11:33 AM	#1
Alan Henderson Regular Crew Join Date: Feb 2007 Location: Athens, GA Posts: 96	What would your render settings be for this? Happy Thanksgiving! I have taken a Hi8 tape, captured it to MiniDV, re-captured to individual AVI files, added color correction, brightness and contrast, and NeatVideo noise reduction in Vegas 6.0. Now I am ready to render. I have done this several other times but keep having various issues. After rendering, I will move the files into Ulead MovieFactory to export to DVD. So, after doing lots of researching, there is quite a difference of opinion on how to best render in Vegas. My question: Would you go with the default or would you custom render? Up till now, I have rendered to AVI (default settings). If you would custom render, what would be your settings? This is a wonderful website, by the way, and thanks for any response that comes. alan

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

November 22nd, 2007, 11:36 AM	#2
Mike Kujbida Inner Circle Join Date: May 2005 Location: Windsor, ON Canada Posts: 2,770	How long is the video? Is there a reason you're not using DVD Architect?

November 22nd, 2007, 01:33 PM	#3
Alan Henderson Regular Crew Join Date: Feb 2007 Location: Athens, GA Posts: 96	Each clip is less than 10 minutes. No particular reason I am not using DVD Architect. Would it be a better choice? alan

November 22nd, 2007, 02:01 PM	#5
Alan Henderson Regular Crew Join Date: Feb 2007 Location: Athens, GA Posts: 96	Total length of video is 40 minutes. alan

November 22nd, 2007, 02:26 PM	#6
Mike Kujbida Inner Circle Join Date: May 2005 Location: Windsor, ON Canada Posts: 2,770	VBR (what I'd use): 8,000,000 / 8,000,000 / 4,800,000 CBR: 8,000,000 Use the default AC-3 setting for audio. Use the "DVD Architect NTSC video" template for video but customize it by clicking the word "Custom" (next to the render options) and then the "Video" tab. Select either CBR or VBR and enter the above numbers. You can save this as a preset if you want to. Make sure both files have the same surname (i.e. myvideo.ac3 and myvideo.mpg) and go into the same folder. That way, when you import the video file into DVD Architect, the audio file will follow automatically.