Preview = best quality?
This may sound like a dumb question:
When you apply effects in your premiere timeline (such as color correction) and then you hit preview and it renders the timeline, when it finishes rendering and you get your preview, is that full quality or just preview quality? In particular, if I hook the firewire up to my camera after the footage is rendered and hit play, and record with the camera, is that full DV quality or some kind of lesser quality? Do I have to print to tape, or export the movie in order to get full quality? Nobody's had an answer on three different forums, I hope you guys can come through. Thanks! JR |
Please do a search on "ntsc pal" because it has been discussed
a lot of times already. Basically you can do it with any NLE. However, especially the conversion form NTSC to PAL is the most difficult one. It will probably NOT look good. There are houses that can do this conversion for you as well, usually a lot better. There is also special software for it, but I don't have any knowledge about which packages there are and how good they are. Ofcourse it would've been better to just shoot in PAL (with a rental for example). Ofcourse it's too late for that. Good luck. |
Never trust a preview to be full quality. It might be or it might not.
Who knows. The output will be DV since that is the only thing your camera understands. However it might not be full quality. I would always do a final render / print to tape. This way you know for sure you will be getting the best quality. |
What you see in the Monitor window is not 100% of the quality you get out the firewire port.
If you render first, what you see on your camcorder is as good as it gets. If you have rendered. |
Okay...
I have an RT card with an external monitor and that's what I was going by. I added a matte and did some color correcting (contrast and saturation) then the little RT box said "project needs rendering" and then I rendered it .
Thanks for the response...I came up empty on the official adobe forums, the pinnacle forum for my RT card, and another DV forum. I'm learning all of this as I go, trying to be dependent on less people from now on, but it's sure a process! Jeremiah |
Thanks Steven, I will check that out.
|
Thanks very much all. Plan C it is.
|
Premiere Pro: 16:9 and 4:3 modes
Since we are living a transition period between 4:3 and 16:9 aspect ratios, many of us has material in both formats. Now, my problem is this: I'm filming with the new camera in 16:9 but also have to edit new material mixed with old 4:3 format. For the time being the TV company will broadcast the 16:9 material in the letter box style with the black edges. It's only in the future they will change to true/native 16:9 braodcast.
To maximize quality I'm planning to provide the TV company with two master tapes: one in true 16:9 and another in 4:3 format with the black edges. (That is, for 4:3 broadcast there is no stretch of the old material but only cropping.) Now, I have not figured out any easy way how a Premiere Pro project can be converted from 16:9 to 4:3 mode retaining the same timeline. Is that possible at all? (If nothing else, what about copy-paste exploiting the clip board and having two projects running simultaneously?) |
I assume you can change the project properties like you can
in Vegas for example. Change the project to 4:3. Right-click on your footage and select "maintain aspect ratio". That should auto-generate the letterboxing you are looking for. |
<<<-- Change the project to 4:3. -->>>
Rob, That's precisely the problem. There seems to be no way to do this. If there is a way to do this, then the next move by selecting "maintain aspect ratio" is clear. |
I don't have Premiere Pro so I can't look. But when you start it
up you can choose whether you want a 4:3 or 16:9 project and you can't change this lateron? That's weird. If so, just render out to a 16:9. Start a new 4:3 project and load that file. Fix the aspect ratio and your done. |
The only way that I can think of how to do this at the moment would be:
Edit project in 16x9 Start a new project 4x3 and import the 16x9 project into the 4x3 (blank) project. You will then need to click on interpret footage, and select conform aspect ratio to 16x9. You will probably have to do this on each clip in the timeline/ bin. Save the project. Then render the sequence. Hopefully now you will have a project that is 4x3 letter boxed and another project that is straight 16x9. Hope this works and helps, Ed |
Premiere Pro 1.5 crashes when Boris Red 3.0 GL is initiated
Premiere Pro 1.5 crashes (simply turns off) when Boris Red 3.0 GL is initiated...is there a solution?
Thanks |
Video clip from my digital camera to Premiere 6.0
I transferred several short video clips taken by my digital camera (Canon S50) which are .avi files.
When I import to Premiere 6.0, I get the following error message: Unable to open that file. File uses an unsupported compression format. File path: C:\etc. etc. AVI I'm positive that Premiere accepts .avi format. |
Try this: Capture the clips using the software that came wirth your camera. Then export them as a microsoft DV avi. If the camera did not come with software, try Windows movie maker that is included with XP. Then export as DV AVi and Premiere should be fine.
|
All times are GMT -6. The time now is 06:26 PM. |
DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network