Audio Panning Issues in Premiere at DVinfo.net

Dale Stoltzfus · September 10th, 2007, 05:26 AM

Hi!

Ok, I have a problem. While working on a current project, I opened an audio clip in Audition from Premiere. I tweeked it and made the (stereo) clip mono, using only the audio from the left track. Saved and went over to Premiere. However, when played in Premiere's timeline, I here sound on the left only. It shows this way in the waveform display as well. But when I preview the file in the project tab, sound is coming from both left and right. I tried opening the audio in Audition again and changing the mono clip back to stereo (obviously, the same thing on both left and right). Again, it sounds fine in Audition and when played from the Project tab, but in the time line, it only has audio on the left track. What's my problem? It seems to be a project setting that I need to change...

Thanks!

Oh, and I'm running Premiere Pro 2.0 with the Production Studio Premium CS@ license.

Dale

Mike Teutsch · September 10th, 2007, 06:29 AM

Dale,

In Premiere, open audio effects then click fill left. This fills the left channel over the right.

Mike

Dale Stoltzfus · September 10th, 2007, 06:35 AM

Thanks, Mike. I new it had to be something simple like that; I just couldn't find it.

Mike Teutsch · September 10th, 2007, 06:40 AM

My pleasure.

M

Petri Kaipiainen · September 10th, 2007, 09:08 AM

One way of going from stereo to mono is to create a mono submix channel in Premiere mixer and route stereo channels there.

September 10th, 2007, 05:26 AM	#1
Dale Stoltzfus Major Player Join Date: Jun 2007 Location: Ephrata, PA United States Posts: 257	Audio Panning Issues in Premiere Hi! Ok, I have a problem. While working on a current project, I opened an audio clip in Audition from Premiere. I tweeked it and made the (stereo) clip mono, using only the audio from the left track. Saved and went over to Premiere. However, when played in Premiere's timeline, I here sound on the left only. It shows this way in the waveform display as well. But when I preview the file in the project tab, sound is coming from both left and right. I tried opening the audio in Audition again and changing the mono clip back to stereo (obviously, the same thing on both left and right). Again, it sounds fine in Audition and when played from the Project tab, but in the time line, it only has audio on the left track. What's my problem? It seems to be a project setting that I need to change... Thanks! Oh, and I'm running Premiere Pro 2.0 with the Production Studio Premium CS@ license. Dale

September 10th, 2007, 06:29 AM	#2
Mike Teutsch Inner Circle Join Date: Oct 2004 Location: Port St. Lucie, Florida Posts: 2,614	In audio effects--use fill left or fill right Dale, In Premiere, open audio effects then click fill left. This fills the left channel over the right. Mike __________________ Chapter one, line one. The BH.

September 10th, 2007, 06:40 AM	#4
Mike Teutsch Inner Circle Join Date: Oct 2004 Location: Port St. Lucie, Florida Posts: 2,614	My pleasure. M __________________ Chapter one, line one. The BH.

September 10th, 2007, 06:35 AM	#3
Dale Stoltzfus Major Player Join Date: Jun 2007 Location: Ephrata, PA United States Posts: 257	Thanks, Mike. I new it had to be something simple like that; I just couldn't find it.

September 10th, 2007, 09:08 AM	#5
Petri Kaipiainen Major Player Join Date: Apr 2007 Location: Espoo Finland Posts: 380	One way of going from stereo to mono is to create a mono submix channel in Premiere mixer and route stereo channels there.