|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
July 4th, 2008, 04:20 PM
|
#1 |
|
Regular Crew
Join Date: Jul 2005
Location: Los Angeles, CA
Posts: 62
|
Sennheiser SK100 wont power on....
I got a SK100 body pack transmitter that wont turn on, i have tried many different battery's and have ruled that out, besides that any other ideas why it wont turn on?
It worked fine about 1 month ago and has been in my pelican case ever since, stored with batteries removed. |
|
|
|
July 4th, 2008, 04:25 PM
|
#2 |
|
Inner Circle
Join Date: Dec 2002
Location: Augusta Georgia
Posts: 5,421
|
Dear Max,
If this is a Generation 1 model, there is a chance that it is powered on, but the display is blank. Try a fresh battery, then see if your receiver picks up a signal. If you have not changed the frequencies, then it may just work.
__________________
Dan Keaton Augusta Georgia |
|
|
|
|
July 4th, 2008, 04:59 PM
|
#3 |
|
Regular Crew
Join Date: Jul 2005
Location: Los Angeles, CA
Posts: 62
|
Thanks for the suggestion, but unfortunately still nothing, no display or led lights come on. The batteries are good if i stick them in another device.
|
|
|
|
|
July 4th, 2008, 05:16 PM
|
#4 |
|
Inner Circle
Join Date: Dec 2002
Location: Augusta Georgia
Posts: 5,421
|
Dear Max,
Is yours a "G2"? It is a "G2" if it uses AA batteries. It is a "G1" if it uses a 9 Volt battery. With the "G2", you have an indication, other than the LCD, that the unit is powered on. If I remember correctly, with the "G1" there is no indication that the unit is powered on, other than the LCD.
__________________
Dan Keaton Augusta Georgia |
|
|
|
|
July 4th, 2008, 07:36 PM
|
#5 |
|
Regular Crew
Join Date: Jul 2005
Location: Los Angeles, CA
Posts: 62
|
its the g2 I have.
|
|
|
|
|
| ||||||
|
||||||
|
|
