Need to pad mixer line output for DV953 mic input at DVinfo.net

Mark Burlingame · January 28th, 2005, 07:06 PM

Hey Everyone,
I want to run audio into my Pana PV-DV953 from a Yamaha MG 10/2 mixer which only has line level outputs. Can anyone point me in the right direction as to a good way to pad the output back down to mic level? I am quite competent with a soldering iron so DIY solutions are also viable. thanks Mark

David Ennis · January 29th, 2005, 08:51 AM

Here you go:

http://www.dplay.com/book/pgs2e/pads.pdf

You will probably want to poke around the rest of Jay Rose's site, and consider buying his book, and/or that of Ty Ford, a pro contributor to this forum (www.tyford.com).

January 28th, 2005, 07:06 PM	#1
Mark Burlingame Regular Crew Join Date: Jul 2004 Location: Oakland, CA Posts: 77	Need to pad mixer line output for DV953 mic input Hey Everyone, I want to run audio into my Pana PV-DV953 from a Yamaha MG 10/2 mixer which only has line level outputs. Can anyone point me in the right direction as to a good way to pad the output back down to mic level? I am quite competent with a soldering iron so DIY solutions are also viable. thanks Mark

January 29th, 2005, 08:51 AM	#2
David Ennis Fred Retread Join Date: Jul 2004 Location: Hartford, CT Posts: 1,227	Here you go: http://www.dplay.com/book/pgs2e/pads.pdf You will probably want to poke around the rest of Jay Rose's site, and consider buying his book, and/or that of Ty Ford, a pro contributor to this forum (www.tyford.com). __________________ "Nothing in the world can take the place of persistence..." - Calvin Coolidge "My brain is wired to want to know how other things are wired." - Me

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search