|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
July 11th, 2004, 03:56 PM
|
#1 |
|
Old Boot
Join Date: Aug 2002
Location: London UK
Posts: 3,633
|
OT: Need 6mm to ¼" Whitworth?
[Ken . .usual request to move where you want to .. thank you .. Graham]
Says it all. It's for my new external 5" LCD monitor for filming. I can make a bracket . . but would like to convert exsisting 6mm threaded hole to ¼" Whitworth. Not much option to Tapping it . . . TIA Grazie |
|
|
|
July 12th, 2004, 02:50 AM
|
#2 |
|
Major Player
Join Date: May 2003
Location: York, England
Posts: 518
|
Get a small piece of 6mm aluminium sheet (or 2x3mm sandwiched together) with Araldite. Drill one hole for 6mm bolt to fix to base of monitor and a second nearby tapped 1/4" Whitworth.
Expensive if you don't have the taps and dies (try Screwfix for these); 3mm Aluminium is available in B&Q. |
|
|
|
|
July 12th, 2004, 03:05 AM
|
#3 |
|
Old Boot
Join Date: Aug 2002
Location: London UK
Posts: 3,633
|
Alan . .you been following me?!?!?! "3mm Aluminium is available in B&Q." . . I was there yesterday! and yes, this is exactly the solution I've come up with. I'm gonna use a nice piece of angled ali [ B&Q ] that will cover the 6mm, drill hole for the ¼" WW and go from there.
As a test I got a 48p - yes 48 pence - fence wooden strap "U" fitting from B&Q .. galvanised bent metal. Might use this instead! Alan thank you, Grazie |
|
|
|
|
| ||||||
|
||||||
| Thread Tools | Search this Thread |
|
|
