GL2 white balance?

Trond Saetre · April 18th, 2007, 02:51 AM

If you still get too much green after manually white balancing, you could turn down the green a little bit in the custom preset.

Ronnie Lindqvist · April 18th, 2007, 07:57 AM

Thanks for your suggestion. I have tried that but it doesn't compensate enough. I have to try different white papers I think, or in worst case check my camera at Canon service center.

How about you guys? Do you have success with manually WB indoors?

Cheers

/Ronnie

Mark Holland · April 20th, 2007, 07:24 AM

Quote:

Originally Posted by Joe Irvine

After a manually set white balance do you need to reset WB after taking the camara into Lock and bringing it back to Standby? Also the same question with reguard to a auto power shut off.

Thanks in advance joe irvine

Simple answers, No and No. It's been my experience that the manual WB maintains it's settings even when you remove/change the battery. I'm assuming it's due to the internal battery.

Mark

April 18th, 2007, 02:51 AM	#16
Trond Saetre Inner Circle Join Date: Jun 2003 Location: Bergen, Norway Posts: 3,377	If you still get too much green after manually white balancing, you could turn down the green a little bit in the custom preset.

April 18th, 2007, 07:57 AM	#17
Ronnie Lindqvist New Boot Join Date: Apr 2007 Location: Hisings Backa (Sweden) Posts: 17	Thanks for your suggestion. I have tried that but it doesn't compensate enough. I have to try different white papers I think, or in worst case check my camera at Canon service center. How about you guys? Do you have success with manually WB indoors? Cheers /Ronnie