|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
June 16th, 2009, 09:36 AM
|
#1 |
|
Regular Crew
Join Date: Dec 2008
Location: new york, Israel
Posts: 136
|
Hey guys i'm trying to buy a letus extreme 35mm
i'm using the a1, i know that i need 72mm diameter thread but do i get the 45cm rod support system for the letus..?
Thanks guys. |
|
|
|
June 16th, 2009, 08:39 PM
|
#2 |
|
Regular Crew
Join Date: May 2007
Location: South Bend, IN
Posts: 179
|
If you're asking if you need the rails, the answer is a definite "yes". It should all be available as a kit. Where are you buying from?
__________________
Woz |
|
|
|
|
June 18th, 2009, 12:29 AM
|
#3 |
|
Regular Crew
Join Date: Dec 2008
Location: new york, Israel
Posts: 136
|
Probably B&H , I would need a case also wouldn't i?
|
|
|
|
|
June 18th, 2009, 10:42 AM
|
#4 |
|
Regular Crew
Join Date: May 2007
Location: South Bend, IN
Posts: 179
|
Yes. Letus makes cases specifically for their adapters. B&H sells those cases.
I've done a lot of research on the lens adapters, but have not been able to pull the trigger yet. Be sure to post some footage once you start shooting with the Letus.
__________________
Woz |
|
|
|
|
June 18th, 2009, 11:21 AM
|
#5 |
|
Regular Crew
Join Date: Dec 2008
Location: Roma, Italy
Posts: 83
|
Personally, I'd go with the 60mm rods, not 45. It depends what you're doing, sizes of lenses etc. But if you want to upgrade later and need more space to load stuff on your rails, you aren't going to have enough room with 45mm.
I'm glad I chose the Proteus Cinevate system with 60mm rods. Chris |
|
|
|
|
| ||||||
|
||||||
|
|
