|
|||||||||
|
Thread Tools | Search this Thread |
November 20th, 2004, 09:50 AM | #1 |
New Boot
Join Date: Nov 2004
Location: Arlington, VA
Posts: 20
|
question from rookie about custom presets
Hi all -
Forgive me if this is obvious - Day#2 as XL2 owner I got a list of suggested settings for a custom preset - this person suggests "Coring=0", "Sharpness=0", among others. Does "0" mean all they way to the left end of the +/- spectrum or the middle default setting? Like gain, do these variables have negative values or is zero as low as you go? Many thanks... |
November 20th, 2004, 09:58 AM | #2 |
Trustee
Join Date: Oct 2001
Location: San Luis Obispo CA
Posts: 1,195
|
David
0 would typically describe the center or default postition...most of us will use negative and postive numbers to describe positions to the left and right of center. Barry |
November 20th, 2004, 10:38 AM | #3 |
New Boot
Join Date: Nov 2004
Location: Arlington, VA
Posts: 20
|
Barry -
Thank You! |
| ||||||
|
Thread Tools | Search this Thread |
|