|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
November 28th, 2010, 12:39 PM
|
#1 |
|
Regular Crew
Join Date: Jun 2010
Location: Nottingham United Kingdom
Posts: 33
|
7.2 or 7.4 Volt batts.
Hi all I have just been looking for extra batteries for my XL2 and I have noticed that independent batteries are listed as 7.2 and 7.4 volts does the XL2 take both?............Many Thanks Pete.
|
|
|
|
November 28th, 2010, 02:33 PM
|
#2 |
|
Inner Circle
Join Date: Mar 2003
Location: Billericay, England UK
Posts: 4,711
|
Yes, and if you look at your mains charger you'll probably notice it gives 8.4 volts. The camera is pretty tolerant of voltage.
|
|
|
|
|
November 28th, 2010, 02:41 PM
|
#3 |
|
Inner Circle
Join Date: Feb 2004
Location: switzerland
Posts: 2,133
|
li-ion are 3.6V element. so you can stack them to get 7.2, 10.5, 14.4 etc...
unfortunately voltage vary if you consider nominal voltage or charging voltage. so usually 7.2=8.4 10.5=11.2 14.4-16.x etc... some camera are finnicky about voltage but if cell count is ok, there is no risk you go too high. lamps (bulbs) are sometime more finnicky and i burned many bulbs because i just turned the lamp on just after charging. a goor info on BatterySpace.com/AA Portable Power Corp. Tel: 510-525-2328 - LiMnNi Cells/Packs |
|
|
|
|
November 29th, 2010, 05:01 AM
|
#4 |
|
Wrangler
Join Date: Sep 2001
Location: Northern VA
Posts: 4,487
|
The terminal voltage output of a battery will vary somewhat depending on the charge state and load. If the battery is rated/listed for the camcorder and around 7.2 it should be OK.
__________________
dpalomaki@dspalomaki.com |
|
|
|
|
| ||||||
|
||||||
|
|
