Confused on set up to record 24p at DVinfo.net

Mike Bailey · January 20th, 2011, 09:46 PM

I have a JVC gy-hm700. I've spent a couple of hours trying to record in 24p onto the nanoFlash--but I have only been successful recording in 30p and 60i. I've tried the pulldown, I've also selected PSF but I'm either too dense or out of my league. I can't get the nanoFlash screen to show its set to anything resembling 24p.

Dan Keaton · January 21st, 2011, 07:40 AM

Dear Mike,

I recommend that you set the Camera to 1080p24 mode, then turn the camera off.

Setup the nanoFlash with Video|3:2 Pulldown Removal on.

Connect the camera to the nanoFlash, power on the nanoFlash first, then power on your JVC 700 camera.

This special procedure for this camera is documented in our manual:

JVC 700 / JVC 250
1080P24 Pulldown removal from JVC 700 requires turning the
nanoFlash on 1st, then the camera, to work properly.

Please let me know if this works.

I will send you a Private Message with my phone numbers.

Dan Keaton · January 21st, 2011, 09:29 AM

Dear Mike,

Our support staff will be calling you shortly.

One problem that can occur with 3.2 Pulldown Removal, is that we need to have the Viewfinder data turned off in the HD-SDI output

Of course, one would always want this to be turned off, but if it is on, then it interferes with our ability to detect the 3:2 Pulldown cadence and thus prevents us from recording 24p (or 23.976p).

January 20th, 2011, 09:46 PM	#1
Mike Bailey Regular Crew Join Date: Feb 2010 Location: Rochester Hills, MI Posts: 47	Confused on set up to record 24p I have a JVC gy-hm700. I've spent a couple of hours trying to record in 24p onto the nanoFlash--but I have only been successful recording in 30p and 60i. I've tried the pulldown, I've also selected PSF but I'm either too dense or out of my league. I can't get the nanoFlash screen to show its set to anything resembling 24p.

January 21st, 2011, 07:40 AM	#2
Dan Keaton Inner Circle Join Date: Dec 2002 Location: Augusta Georgia Posts: 5,421	Dear Mike, I recommend that you set the Camera to 1080p24 mode, then turn the camera off. Setup the nanoFlash with Video\|3:2 Pulldown Removal on. Connect the camera to the nanoFlash, power on the nanoFlash first, then power on your JVC 700 camera. This special procedure for this camera is documented in our manual: JVC 700 / JVC 250 1080P24 Pulldown removal from JVC 700 requires turning the nanoFlash on 1st, then the camera, to work properly. Please let me know if this works. I will send you a Private Message with my phone numbers. __________________ Dan Keaton Augusta Georgia Last edited by Dan Keaton; January 21st, 2011 at 09:16 AM.

January 21st, 2011, 09:29 AM	#3
Dan Keaton Inner Circle Join Date: Dec 2002 Location: Augusta Georgia Posts: 5,421	Dear Mike, Our support staff will be calling you shortly. One problem that can occur with 3.2 Pulldown Removal, is that we need to have the Viewfinder data turned off in the HD-SDI output Of course, one would always want this to be turned off, but if it is on, then it interferes with our ability to detect the 3:2 Pulldown cadence and thus prevents us from recording 24p (or 23.976p). __________________ Dan Keaton Augusta Georgia