|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
December 6th, 2005, 12:40 PM
|
#1 |
|
Tourist
Join Date: Dec 2005
Posts: 4
|
Getting HDV Back onto TAPE from FCP using Sony HDV Camera
Hi
Running FCP 5.0.3 - capturing HDV1080i50 from my Sony HVR-A1E with no problems using my iMac G5 2GHz 1Gb RAM. How on earth do I get the edited material back onto the Camera Tape tho? Computer cannot see camera when trying to firewire out! As discussed elsewhere, this setup works fine albeit a little slow on some of the effects, until this last step. The HDV 1440 x 1080 25fps or 30fps are dimmed in the "View" Menu. Am I destined to have to downconvert everthing to DV just to get a master copy of my edited material! Any thoughts would be great!! Paul |
|
|
December 6th, 2005, 06:31 PM
|
#2 |
|
Major Player
Join Date: Mar 2004
Location: Roanoke, VA
Posts: 796
|
Choose, File>Print to Tape.
__________________
Dave Perry Cinematographer LLC Director of Photography • Editor • Digital Film Production • 540.915.2752 • daveperry.net |
|
|
|
December 6th, 2005, 06:35 PM
|
#3 |
|
Wrangler
Join Date: Dec 2002
Location: Mays Landing, NJ
Posts: 11,794
|
This issue was already resolved in the following thread:
http://www.dvinfo.net/conf/showthread.php?t=55606 Paul, please don't cross-post questions, it's against our policy at DVinfo: http://www.dvinfo.net/conf/announcement.php?f=38&a=23 |
|
|
|
| ||||||
|
||||||
| Thread Tools | Search this Thread |
|
|
