|
|||||||||
|
Thread Tools | Search this Thread |
March 20th, 2008, 04:02 PM | #1 |
Regular Crew
Join Date: Mar 2008
Location: Jurbise, Belgium
Posts: 29
|
Anton Bauer ProPac 14 Won't Display Time Remaining
I have the ProPac 14 battery and it won't display "time remaining" in the display when I change the option to that. It only shows the voltage. This battery was purchased around 1994 (bought them used), although they have not been used much and have been taken EXTREMELY good care of. Honestly, I get over 3 hours of operation...
But, since they are older, does the older chip not communicate with the cam like a newer battery would, or is there something else I am not doing... I'd appreciate any suggestions. It's not a make or break option, since the voltage meter seems to work pretty well, but I am curious... Thanks, Taylor |
March 20th, 2008, 08:23 PM | #2 |
Trustee
Join Date: Sep 2007
Location: Newark, Delaware
Posts: 1,067
|
No the older Anton/Bauers will not give you "time" only voltage also I found if you have anything between the battery and the camera ie I wireless that runs off the battery it also wont give you "time".
|
March 23rd, 2008, 11:41 AM | #3 |
Major Player
Join Date: Jun 2006
Location: Savannah, GA
Posts: 463
|
In order to communicate remaining capacity to a connected camera, Anton Bauer batteries need to have the "Digital" in their name - essentially, if your battery doesn't have an LCD meter on it, it's not a Digital version.
|
| ||||||
|
Thread Tools | Search this Thread |
|