See what I can learn hanging around? My guess would have been 190 hours. :) Truthfully, none of it makes sense to me. :(

Just out of curiosity... What kind of video connections does it have? How long would it run on a battery?

Jim,

Sent you a private mail.

=gb=

Can't really say as to battery time...I'm guessing pretty much the same as other LCDs running on a Canon depending on battery size. As I said, I haven't used it, but the connections are a RCA video and audio on one end and a multi pin connector in the other that interfaces with the monitor

I am pretty sure it translates to the following

Operation = 190 hours
Drum Run = 60 hours
Tape Run = 50 hours
Threading = 260 hours

IF this is incorrect, please say something, but I am pretty sure it is right.
Looks like about 50-60 tapes have been recorded on it.

Still up for Sale at 2700
Comes with 2 batteries instead of 3
no portabrace case

Excuse my ignorance. So on a PD-150, you can have the drum running without tape going thru it, have it operating without the drum running?. How would you track all of this, does the camera do it?

I don't know what threading is...

$350 new lowest price
 

Going once
Going twice,
Going.........
One last time before it goes to Ebay!

Peace, Rolland

NEW Matrox RTX.100 Portable Editing System For Sale - No longer required
 

We purchased a new, portable RTX.100 system for a specific project which subsequently didn't come through, so we have a brand new, fully configured and ready to go system for sale.

Here are the specs

Hornet Pro P4 Matrox RTX.100 editing system (slightly larger than a Shutle XPC case) with clear side panel, Topower 350W PSU, Intel BOXD915GUXLK LGA775/DDR2 Mobo, Blue Cold cathode light, Antec 40mm case fan, On board 16bit audio, USB2, LAN etc

MSI PCX5750-TD128 PCI-X Dual output graphics with DVI, VGA and S-video out

Maxtor 300Gb SATA Capture Drive
Maxtor 200GB SATA Export Drive
Maxtor 60Gb SATA System Drive

Intel P4-54 3.2GHz 1Mb Cache Processor

1GB Kingston DDR2 PC4200 RAM

DVD-ROM Drive, Keyboard and Mouse

Matrox RTX100 hardware with breakout box

Pre-loaded with Windows XP Professional and Adobe Premiere Pro 1.5

This is boxed, tested and brand new and comes complete with all the manuals etc. It cost us $3093, but we will accept $2400, no tax. Buyer pays courier costs from California. Contact us at info@videoproductionhouse.com or phone Andrew on 949 842 7566.

For a description of the Hornet case etc, visit:
http://www.monarchcomputer.com/Merchant2/merchant.mv?Screen=CTGY&Store_Code=M&Category_Code=Hornet

If you are interested in seperating out just the rtx.100 let me know.

Yes the camera does all the tracking.

The PD150/170 will shut the drum off, after a certain time frame, if you are not doing anything. But the camera will stay on.
Threading is the total number of times a tape has been loaded into the deck.

Thanks. SO much to learn....

$500 + shipping

(that is less than the charger alone)

Got what I needed. Thanks for this awesome service.

The system is fully configured and ready to go, so I would rather sell it as a complete system.

Regards

Andrew