Marshall 5 Inch HDMI Professional Monitor for Sale.
 

Hi All,

I am also selling my Marshall 5 inch monitor with the Sony NP-F Battery mount. Good for use with a Sony FS700 if you have those batteries.

Monitor is in great condition. Slight light scratches on the screen but hardly noticeable. Purely from it being plastic. I have always looked after it with a Manfrotto case. Also Supplied.

New this is currently £406.00. I am looking for £290.00.

Here it is on CVP. Details are there as well. Buy - Marshall Electronics V-LCD50-HDI (VLCD50HDI) 5 inch small 800 x 480 camera-top / portable field monitor with HDMI

Please contact me for more information.

Pictures below.

Re: JVC GY HD100 mic cover
 

Thanks Paul for the link. Will take a look.

Re: Atomos Shogun
 

There is one listed on Craigslist in Atlanta, GA

Re: PSC DV Promix 3 field mixer/preamp + Petrol PEGZ-3 audio bag
 

Bump...reasonable offers will be considered!

Re: Audio-Technica AT825 stereo condenser mic with pouch, cable, windsock
 

Bump...open to reasonable offers!

Canon C100 Mark ii body - 4 Year Warranty - Extra Battery
 

I purchased this camera from B&H 3 months ago. I am a professional wedding videographer and treat my equipment with the greatest care! I'm reluctantly letting it go for $600 less than the current selling price ($5500) and I'm throwing in a new $149 battery and you will also get an EXTENDED 4 YEAR WARRANTY on the camera that is transferable to the buyer. So instead of the standard one year warranty you'd have on a new camera from Canon, you'll have just under 4 years with this. It will run for 4 years from the date of purchase. So this camera is basically new at a much lower price and comes with a far better warranty than you'd get new.

I've only used this cam 5 or 6 times and it's in perfect like-new condition.

Panasonic GH4 Cage
 

Created this cage for the Panasonic GH4 a while ago for myself. I have two more at the moment. Maybe some of you guys are interested? It's 3D printed black ABS, but don't let the fact that its plastic fool you. It's very sturdy,has metal 1/4 inch screw holes and a removable handle. Used this myself last week for a wedding.

Price is 85 euro + shipping. I'm located in Netherlands, but shipping abroad is no problem.

Please note: Coldshoe's and tripod plate are not included. Any questions? Please leave a message in this thread.


Features:
-Panasonic GH4 Cage made from ABS plastic
-One solid piece for added strength
-All 1/4 inch metal mounting screw holes.
-LCD screen fully rotatable and battery and SD card slot reachable
-Flash is NOT usable when the camera is mounted
-Cable locking for headphones / mic and HDMI cable (it locks the cables, but not the plugs)
-Removable handle with 1/4 inch metal mounting screw holes
-Anti-twist feature when mounting the camera and when mounting tripod plate underneath
-Works with available tripod quick release plates. For example the Manfrotto MN501-PL
-Compatible with Metabones speedbooster

Q&A:
“How strong is ABS plastic?”
-It’s strong but you can break it if you really try or abuse it.

“Is the surface just as smooth / perfect as a CNC machined and powerdercoated metal?”
-No, the ABS plastic is 3D printed so you will see minor imperfections on the surface.

“How is the surface?”
-After printing the ABS gets an acetone treatment to strengthen the surface. This makes the surface also very shiny. However you will see scratches very easily on a shiny surface. Because of this the whole surface is very fine sanded.

“How do I mount my GH4 into this cage?“
-There is a standard 1/4 inch screw underneath to mount your camera

“How do I mount the quick release plate underneath if the screw to mount the camera sticks out of the bottom?
-The screw is slightly lowered / embedded, so it is no problem

“Can I still remove the battery when there is a quick release plate mounted?
-Yes, tested with the Manfrotto MN501-PL

“Can the camera rotate in the cage / will it twist?”
-No, there is anti-twist. The camera will be very solid in place. In addition there is an anti-twist hole when mounting a quick release plate.

“Can I reach all the buttons?”
-Only the FN button on the right is a bit harder to reach. All the other buttons are accessible.

“Why doesn’t this thing have way more mounting holes? And why not add 3/8?“
- ABS plastic is not metal and threaded holes need to be added by using inserts. To make sure the structural rigidity is not compromised the amount and the diameter of the holes is limited.

“Do you use this yourself?”
-Yes, I recently filmed a wedding with this. I put it on a steadycam, a tripod, a monopod and walked around a lot of the time handheld.

Re: AKG C451B/ST - Stereo Matched Cardioid Studio Condenser Microphones
 

****PRICE REDUCTION****$800+S/H+PAYPAL!!!!

AKG C451B/ST - Stereo Matched Cardioid Studio Condenser Microphones

AKG C451B/ST - Stereo Matched Pair of Cardioid Studio Condenser Pencil Microphones with H50 Stereo Bar and custom fitted case.

LIKE NEW!!!!

Asking $800 + S/H+PayPal Fee****OBO****

****PM for pictures****Or, see link below for additional details

Will personally deliver in the state of FLA!!!!

AKG C451B/ST - Stereo Matched Pair 2895 Z 00210 B&H Photo Video

BLOWOUT Demo Lowel GL-1 LED light kit in box. FREE SHIP!
 

Hey all!
I'm selling a demo unit of the Lowel GL1 LED light kit. Basically it is *exactly* this kit:
Lowel GL-1 Power LED G1-10 B&H Photo Video
In the original box and everything! Only downside, some scratches on the plastic filter on it.

Retail is $700us regular price at B&H, I'm selling this for $495us INCLUDING FREE SHIPPING WITHIN CONUS/CANADA AND NO PAYPAL FEES!

BLOWOUT Lowel Blender kit, nearly NIB, Free Ship!
 

Hey all!
Getting rid of another demo unit, never used on set, just demoed. Basically mint.
This is the kit here:
http://www.bhphotovideo.com/c/product/653915-REG/Lowel_BLN_9145LB_Blender_LED_1_Light_Kit.html
Comes with AC and Panny batt adapter, stand, case, filter. It's in very good shape.

B&H sells the kit for $560usd
I'm asking $445 including free shipping to CONUS/CAN and no Paypal fees!

Sony PMW-EX1 (READ FULL DESCRIPTION)
 

I'm selling my EX1 which has recently developed an problem where the camera will randomly reboot on it's own.

Everything else about the camera works well.

I haven't looked into repairing the camera but the issue seems to be related to the on-off switch. I press on it and the camera reboots.

Price is $600 with free ground shipping.

Re: Sony PMW-EX1 (READ FULL DESCRIPTION)
 

So does it reboot at all if you stay clear of the power switch, or do you physically have to touch the switch to get it to reboot?

I'm thinking that if you don't get anywhere near the switch, once powered on, it should stay on, correct?

Re: Sony PMW-EX1 (READ FULL DESCRIPTION)
 

Hi Ken, The camera reboots on it's own. I was able to run it for an hour the other day with no reboot, then today it rebooted almost immediately after starting up. I wouldn't trust the camera without a repair.
Thank you for asking.

Re: SURREY, UK BASED: *BARELY USED* RED Epic-X (51.7hrs) and a wide array of accessor
 

Cheers, Dylan. Will do.

Re: SURREY, UK BASED: *BARELY USED* RED Epic-X (51.7hrs) and a wide array of accessor
 

Items now SOLD...

* RED Pro Touch 5.0" LCD w/ Lemo Cable and Microfibre bag

* Wooden Camera A-Box for Scarlet / Epic with protective rubber backing pad

* RED DSMC Tactical Top Plate 2.0

* RED DSMC Tactical Right Z-Adaptor