2 microphones X 1 audio

[Clecio Mayrink]

I have a V1U and 2 wireless microphones, but when I make the interview, the sound from the channels, to be separeted.

How make the interview with the channel 1 and 2 linked ?

Clecio

[David Stoneburner]

By linked I'm assuming you mean mixed together into 1 audio channel. There are 2 ways to do that. 1. you can send both mic signals into a separate mixer then into one of the V1U channels. 2. you can combine and mix them when editing. The benefit of 1. is that you can control the mix on the fly and have good clean audio. You could try to split the audio feeds from the mics and go into both channels at the same time, but that may induce problems and loss of signal strength. The benefit of waiting till you edit is that it gives you maximum control over the separate audio feeds.

[Clecio Mayrink]

Thanks David,

I understand now.

I control the volume and add the two channels in editing software

Clecio :)

[Andrew Smith]

That's what I do. Record separately and put them together in post ... giving the most control possible.

Andrew