|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
November 1st, 2008, 11:45 PM
|
#1 |
|
Major Player
Join Date: Aug 2007
Location: Warren, Pa
Posts: 785
|
XH-A1 went dead.
Is there a reset, or anything I can try to get the XH-A1 to come on, battery is fine, works in my other A1, it came on when I went to capture then just went dead, no life showing at all.
Denny |
|
|
|
November 1st, 2008, 11:54 PM
|
#2 |
|
Regular Crew
Join Date: Feb 2007
Location: Warrington England
Posts: 143
|
Denny there is a reset under the lcd screen it is a small hole but whether it will sort your camera problem I don't know.
Alan |
|
|
|
|
November 2nd, 2008, 03:03 AM
|
#3 |
|
Trustee
Join Date: Dec 2004
Location: Lipa City Batangas, Philippines
Posts: 1,110
|
Hi Denny. Have you checked the Standby/Lock switch beside the Start/Stop button? If it is slightly out of position the camera will appear to be dead.
Richard |
|
|
|
|
November 2nd, 2008, 06:56 AM
|
#4 |
|
Major Player
Join Date: Aug 2007
Location: Warren, Pa
Posts: 785
|
Tried both of those, but no luck looks like it will have to go back to canon, luckily its exactly 11 months old, I hope the turn around time is good.
|
|
|
|
|
November 2nd, 2008, 07:44 AM
|
#5 |
|
Trustee
Join Date: Jan 2008
Location: North Conway, NH
Posts: 1,745
|
Before you send it anywhere, you might want to polish up the contacts within the battery compartment. Some schmutz might have gotten in there.
I've not heard of this happening, but it's worth checking before you ship it off. |
|
|
|
|
November 2nd, 2008, 03:08 PM
|
#6 |
|
Major Player
Join Date: Apr 2006
Location: Sweden
Posts: 244
|
Hi
Does it start in VCR mode? /Bo |
|
|
|
|
November 2nd, 2008, 04:41 PM
|
#7 |
|
Go Cycle
Join Date: Dec 2001
Location: Huntington, NY
Posts: 815
|
Did you use OTHER than CANON batteries?
Does your AC power-supply work? If not, sounds like you burnt out your power board.
__________________
Lou Bruno |
|
|
|
|
| ||||||
|
||||||
| Thread Tools | Search this Thread |
|
|
